Vetta C-15
James Artherholt
I was given a Vetta C-15, with no setup instructions. Would someone
please post a brief set so I can get the unit working. Thanks in
advance.
Jim Artherholt
J.Arth...@worldnet.att.net
troya...@aol.com
In article <32CA65...@worldnet.att.net>, James Artherholt
<J.Arth...@worldnet.att.net> writes:
>I was given a Vetta C-15, with no setup instructions. Would someone
>please post a brief set so I can get the unit working. Thanks in
>advance.
>
>
Hello Jim,
To set wheel diameter and M/hr or KM/hr press the right button until you
see ODO in the lower left-hand corner. Press and hold the right key for
approx. 2-3 seconds. The display will then display the wheel diameter
with the M in M/hr flashing. To change any setting press the left button;
to advance to the next field press the right button.
To set the time, index to the time display with the right button. Press
and hold the right button for 2-3 seconds just as above. Change the
flashing field with the left button, index to the next field with the
right button.
To clear stored values such as Max speed, Average Speed, and ATM
press/hold the left button and press the right button then release both.
Unfortunately, you can't set the mileage. The only thing you can do is
clear the current mileage by removing the battery for some period.
Regards,
Troy