Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Too lazy to do the research.... Part #'s for rebuild of first gen non-pointy alloy blade Chorus Ergos
25 views
Skip to first unread message
SconnieRoadie
May 14, 2013, 9:43:35 AM5/14/13
to
So these need total rebuilds... What parts/#'s to do so? Done this a number of times with various gens, just haven't noted the details.
TIA!
Sconnie
TIA!
Sconnie
AMuzi
May 14, 2013, 12:35:43 PM5/14/13
to
On 5/14/2013 8:43 AM, SconnieRoadie wrote:
> So these need total rebuilds... What parts/#'s to do so? Done this a number of times with various gens, just haven't noted the details.
Spring set. (item "J" on diagram)
> So these need total rebuilds... What parts/#'s to do so? Done this a number of times with various gens, just haven't noted the details.
http://www.yellowjersey.org/ergo1.html
If your spring carriers are the original diecast, that
version is prone to hairline cracks. Replace with the nylon
carrier/spring assembly. It's not much more than the springs
alone.
You'll probably want cables and tape at this point too.
--
Andrew Muzi
<www.yellowjersey.org/>
Open every day since 1 April, 1971
SconnieRoadie
May 16, 2013, 9:36:44 AM5/16/13
to
Ummm... sorry, mine are first gen 10v... are the parts the same?
Thanks again.
Peter
AMuzi
May 16, 2013, 6:13:22 PM5/16/13
to
On 5/16/2013 8:36 AM, SconnieRoadie wrote:
> On Tuesday, May 14, 2013 11:35:43 AM UTC-5, AMuzi wrote:
>> On 5/14/2013 8:43 AM, SconnieRoadie wrote:
>>
>>> So these need total rebuilds... What parts/#'s to do so? Done this a number of times with various gens, just haven't noted the details.
>>
>>
>>
>>
>>
>> Spring set. (item "J" on diagram)
>>
>> http://www.yellowjersey.org/ergo1.html
>>
>>
>>
>> If your spring carriers are the original diecast, that
>>
>> version is prone to hairline cracks. Replace with the nylon
>>
>> carrier/spring assembly. It's not much more than the springs
>>
>> alone.
>>
>>
>>
>> You'll probably want cables and tape at this point too.
>
> On Tuesday, May 14, 2013 11:35:43 AM UTC-5, AMuzi wrote:
>> On 5/14/2013 8:43 AM, SconnieRoadie wrote:
>>
>>> So these need total rebuilds... What parts/#'s to do so? Done this a number of times with various gens, just haven't noted the details.
>>
>>
>>
>>
>>
>> Spring set. (item "J" on diagram)
>>
>> http://www.yellowjersey.org/ergo1.html
>>
>>
>>
>> If your spring carriers are the original diecast, that
>>
>> version is prone to hairline cracks. Replace with the nylon
>>
>> carrier/spring assembly. It's not much more than the springs
>>
>> alone.
>>
>>
>>
>> You'll probably want cables and tape at this point too.
>
> Thanks, Andy!
>
> Ummm... sorry, mine are first gen 10v... are the parts the same?
>
> Thanks again.
>
> Peter
>
Yes, manual is for that whole series of round-top Ergo 9/10,
>
> Ummm... sorry, mine are first gen 10v... are the parts the same?
>
> Thanks again.
>
> Peter
>
1998 through 2009.
The early pointy 8 Ergo are quite similar inside but the new
QS, Escape & UltraShift types are completely different inside.
0 new messages