How do you program a Vetta C-15?

[Thomas Lane]

I dropped my Vetta C-15 and the battery fell out. It lost it's memory. I
don't have the manual for it, and I can't figure out how the program the darn
thing! Anyone else out there have one of these and know how to program it? I
really just want to be able to set the time and possibly the wheel diameter
for a 26 inch wheel. Any help would be greatly appreciated. Please reply
directly, since I don't check the newsgroup very often. Thanks.

Thomas Lane
tl...@parlant.com

[R.S. Reynolds]

here is the wb address. vett...@aol.com : )

[Steven L. Sheffield]

In article <6fndh7$803$1...@newsd-113.bryant.webtv.net>, Mnt...@webtv.net (R.S. Reynolds) wrote:

> here is the wb address. vett...@aol.com : )

Press the right button until you are in the AVS/ODO mode. Press and hold
the right button for a few seconds until M/hr starts flashing. Press the
left button to set miles or km/h. Press the right button to move to the
calibration number. Press the left button to change the settings, and the
right button to move between digits.

Common calibration numbers can be found on Sheldon Brown's website
(http://www.sheldonbrown.com/)

+-------------------------------------------------------------------+
| Steven L. Sheffield / "Are you hep to the jive? Yeah, yeah!" |
+-------------------------------------------------------------------+
| ste...@veloworks.com / http://www.rivendellbicycles.com/ |
| Vox: +1 415 296-9893 / "Ride lots." -- Eddy Merckx |
+-------------------------------------------------------------------+
| vett...@aol.com / Vox: +1 415 274-3290 / Fax: +1 415 274 3259 |
+-------------------------------------------------------------------+