Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
FlarmLED+ update cable
196 views
Skip to first unread message
lrbj
Jun 6, 2021, 4:48:53 PM6/6/21
to
Dear All,
Does anybody have the pin-out for an update cable to be able to do a firmware update of FlarmLED+?
I've search LX Nav site and manual + doen some gooling, no luck ..:(
Thanks in advance!
/Lars
Does anybody have the pin-out for an update cable to be able to do a firmware update of FlarmLED+?
I've search LX Nav site and manual + doen some gooling, no luck ..:(
Thanks in advance!
/Lars
lrbj
Jun 8, 2021, 4:07:15 PM6/8/21
to
Got a reply from LX Nav
"Just wire RX,TX and GND to DB9 connector 2,3,5. If communication won't work, swap 2 and 3.
Pinout is described in the user manual."
Use the manual for the pin out, as the numbering is not standard...
/Lars
"Just wire RX,TX and GND to DB9 connector 2,3,5. If communication won't work, swap 2 and 3.
Pinout is described in the user manual."
Use the manual for the pin out, as the numbering is not standard...
/Lars
0 new messages