Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Tost Ring Failure

1,326 views
Skip to first unread message

Jock Proudfoot

unread,
Jun 5, 2017, 9:45:05 PM6/5/17
to
Larry Morrow posted
Yesterday we found a toast ring with a fracture in the big ring. It
appears to completely through the ring. Has anyone else had this
experience? I have attached two image flies showing both sides of the
ring.
https://forum.sac.ca/download/file.php?id=254
https://forum.sac.ca/download/file.php?id=253

Frank Whiteley

unread,
Jun 5, 2017, 11:44:32 PM6/5/17
to
We had a TOST large ring failure while winch launching at a CAP Flight Academy a few years ago. It failed at the weld taper and the ring also broke opposite the weldment with the appearance of fatigue crystallization at the break. So, it's possible several launches were done with the failed weld before the ring failed at the second point. It was reported back to the vendor and also to TOST IIRC. Locally we discussed if perhaps some counterfeit supplies were getting into the channel. The academy leader passed away some time after the academy so I don't know the result of the report but perhaps the vendor will recall the event. I'll check.

Frank Whiteley

CindyB

unread,
Jun 6, 2017, 1:34:06 AM6/6/17
to
On Monday, June 5, 2017 at 6:45:05 PM UTC-7, Jock Proudfoot wrote:
> Larry Morrow posted
> Yesterday we found a toast ring with a fracture in the big ring. It
> appears to completely through the ring. Has anyone else had this
> experience?

Yes.
Quite a long time ago, > 15 years.
We subsequently retired the fractured Tost to the ground towing rig
for moving the gliders from tiedowns to launch and back. It is a very unusual occurence but was easily apparent from the loss of the clean 'ping' sound as they jingled around together. The sound was 'flat' and dramatically different, which is what led to discovery before complete failure.

So yes, preflight ALL the equipment. Don't settle for a line helper just waving a rope end or ring in front of the glider for your first daily launch. How's the length of the back splice? How's the bulge of radius change at that point - frayed? Tape wrapped to be invisible? That transfers the wear point to the head of the tape. Look there, too.
Be thorough, be safe.

Cindy B

Tango Eight

unread,
Jun 6, 2017, 6:54:52 AM6/6/17
to
http://www.tost.de/PDF/Arbeitskatalog_engl.pdf

Page 19.

Welded rings are long obsolete (or possibly counterfeit).

The right rings to use are easily identified.

It's pretty important to be using the right rings.

best,
Evan / T8

Dan Daly

unread,
Jun 6, 2017, 7:29:55 AM6/6/17
to
The manual also says that the standard dimensions should be checked and they are available from the factory. Does anyone in ras-land have them?

Tango Eight

unread,
Jun 6, 2017, 8:38:59 AM6/6/17
to
On Monday, June 5, 2017 at 9:45:05 PM UTC-4, Jock Proudfoot wrote:
]
> https://forum.sac.ca/download/file.php?id=254
> https://forum.sac.ca/download/file.php?id=253

btw... these pics aren't publicly accessible.

T8

Dan Daly

unread,
Jun 6, 2017, 9:44:37 AM6/6/17
to
Received a pdf by e-mail; thanks, Glen from Aboyne.
Message has been deleted

Frank Whiteley

unread,
Jun 6, 2017, 4:26:34 PM6/6/17
to
I'll amend my post to say that it was not evident that the failed ring was welded, but that separation had conical male/female shapes at the failure point. Looking for images in the archives, but nothing so far.

Frank Whiteley

John Carlyle

unread,
Jun 6, 2017, 4:51:26 PM6/6/17
to
Frank,

When there are "conical male/female shapes at the failure point" it generally indicates tensile overload failure (caused by exceeding the materials tensile strength). A giveaway would be necking on either side of these shapes, which might be what you're calling failure "at the weld taper".

Fatigue looks very different - the fracture surface shows a smaller smooth portion surrounding the origin, with the remainder of the fracture surface appearing granular (perhaps what you're calling calling "crystallization". Fatigue failure is caused by thousands, perhaps tens of thousands, of load variation in the presence of a small defect in the part (usually on the surface).

These are two completely different failure modes, and have two completely different causes. It would be interesting to see pictures of the actual failed ring and the fracture surface.

-John

Frank Whiteley

unread,
Jun 6, 2017, 11:16:37 PM6/6/17
to
John,

I think you've described it accurately. Still checking around for images. They may not exist. This happened around 2009 and the rings certainly had not seen that many cycles. Not aware that anyone attempted to load test them, but who knows?

Thanks for your comments.

Frank Whiteley

Benedict Smith

unread,
Jun 10, 2017, 4:45:04 PM6/10/17
to
I have personally seen 3 tost ring failures at my gliding club this season,
(the
last one only about 3 hours ago!) these were all the large rings on the
strops,
not the ring pair that goes to the release, unfortunately I have not been
able
to recover any of the rings to see the failure mode, however I was
examining
the rings on the other strops and found a couple that were obviously of
welded construction, and one was clearly oval rather than round, I don't
know
the age of them but they get very heavy use.
Ben.

At 03:16 07 June 2017, Frank Whiteley wrote:
>On Tuesday, June 6, 2017 at 2:51:26 PM UTC-6, John Carlyle wrote:
>> Frank,
>>=20
>> When there are "conical male/female shapes at the failure point" it
>gener=
>ally indicates tensile overload failure (caused by exceeding the
materials
>=
>tensile strength). A giveaway would be necking on either side of these
>shap=
>es, which might be what you're calling failure "at the weld taper".=20
>>=20
>> Fatigue looks very different - the fracture surface shows a smaller
>smoot=
>h portion surrounding the origin, with the remainder of the fracture
>surfac=
>e appearing granular (perhaps what you're calling calling
>"crystallization"=
>.. Fatigue failure is caused by thousands, perhaps tens of thousands, of
>loa=
>d variation in the presence of a small defect in the part (usually on the
>s=
>urface).=20
>>=20
>> These are two completely different failure modes, and have two
>completely=
> different causes. It would be interesting to see pictures of the actual
>fa=
>iled ring and the fracture surface.=20
>>=20
>> -John =20
>>=20
>> On Tuesday, June 6, 2017 at 4:26:34 PM UTC-4, Frank Whiteley wrote:
>> > > We had a TOST large ring failure while winch launching at a CAP
>Fligh=
>t Academy a few years ago. It failed at the weld taper and the ring also
>b=
>roke opposite the weldment with the appearance of fatigue crystallization
>a=
>t the break. So, it's possible several launches were done with the
failed
>=
>weld before the ring failed at the second point. It was reported back to
>t=
>he vendor and also to TOST IIRC. Locally we discussed if perhaps some
>coun=
>terfeit supplies were getting into the channel. The academy leader
passed
>=
>away some time after the academy so I don't know the result of the report
>b=
>ut perhaps the vendor will recall the event. I'll check.
>> > >=20
>> > > Frank Whiteley
>> >=20
>> > I'll amend my post to say that it was not evident that the failed
ring
>=
>was welded, but that separation had conical male/female shapes at the
>failu=
>re point. Looking for images in the archives, but nothing so far.
>> >=20
>> > Frank Whiteley
>
>John,
>
>I think you've described it accurately. Still checking around for images.

>=
>They may not exist. This happened around 2009 and the rings certainly
had
>=
>not seen that many cycles. Not aware that anyone attempted to load test
>th=

howard banks

unread,
Jun 11, 2017, 11:34:20 AM6/11/17
to
Would some kind soul who really knows please tell us whether genuine Tost rings are ever(a) welded or (b) oval? Sounds more like bits of chains such as for those safety chains on trailers to me. Hence their being called earlier Toast rings(sic)!!






On Monday, June 5, 2017 at 9:45:05 PM UTC-4, Jock Proudfoot wrote:

Tango Eight

unread,
Jun 11, 2017, 11:52:36 AM6/11/17
to
On Sunday, June 11, 2017 at 11:34:20 AM UTC-4, howard banks wrote:
> Would some kind soul who really knows please tell us whether genuine Tost rings are ever(a) welded or (b) oval?

The correct rings are stamped LN 65091 on the big ring. The most recent production also have TOST stamped on them. The big ring is oval, the little ring is round.

30+ years ago, there was a different Tost ring set in use. It is not stamped with the LN 65091 designation. It is obsolete and should not be used.

best,
Evan Ludeman / T8

Benedict Smith

unread,
Jun 11, 2017, 4:00:04 PM6/11/17
to
The failures I have seen are not in the tost ring pair at the glider end of
the
strop but the ones further down that connect the strop to the drogue or on

either side of the weak link (a circular ring that the strop is spliced to
and is
coupled to the oval Tost link with the quick release flat), as these are an

integral part of the quick release link I assume that they should be a
genuine
Tost part, but several I have seen are welded construction and don't have
any
visible markings on them. (This is in the UK)

Sean Franke

unread,
Jun 11, 2017, 7:37:42 PM6/11/17
to
Tost Connecting Rings do not have a weld. Tost states that type certification stipulates that every Tost tow release must be operated only with a ring pair meeting the LN 65091 aeronautical standard. Connecting ring pairs must be stamped with the manufacturer's name and the standard number.

WELDED RINGS ARE GENERALLY PROHIBITED. Use of welded rings voids tow release warranties. Welded rings cause damage to tow releases. Undersized rigs can lead to tow release jamming.

Connecting rings must be visually checked and measured at regular intervals. Rings pairs that deviate from standard dimensions must be replaced.

See a ring pair picture here: http://wingsandwheels.com/aircraft-parts/tow-equipment/tow-rings-quick-releases/tost-double-tow-rings.html

Sean Franke

AS

unread,
Jun 11, 2017, 10:15:51 PM6/11/17
to
On Tuesday, June 6, 2017 at 6:54:52 AM UTC-4, Tango Eight wrote:
That is true for the small ring! They are seamlessly rolled or forged but the large ring has to get through it somehow, so it starts its life as a piece or 'wire' which gets formed and its ends are then joined by electric resistance welding (look up 'chain making' on YouTube).
Today, I inspected all the large rings of the double ring pairs I have with our winch and all of them show the tell-tale signs of a weld opposite of the stamped name 'Tost'. At least a close visual did not show any cracks. Maybe a simple 'dye-pen test is in order.

Uli
'AS'

AS

unread,
Jun 11, 2017, 11:20:19 PM6/11/17
to
See my note above. The picture clearly shown the weld in the large ring....

Frank Whiteley

unread,
Jun 12, 2017, 12:12:37 AM6/12/17
to
On reflection, the person who acquired the rings in question was an interesting character. I would not be surprised to find that he might have found a way to load test this set and perhaps unknowingly damaged them prior to putting them in use with the K-21's. As no report is known to have been filed, this secret may have died with him.

Frank W

steph...@lycos.com

unread,
Jun 12, 2017, 10:14:35 AM6/12/17
to

> That is true for the small ring! They are seamlessly rolled or forged but the large ring has to get through it somehow, so it starts its life as a piece or 'wire' which gets formed and its ends are then joined by electric resistance welding (look up 'chain making' on YouTube).
> Today, I inspected all the large rings of the double ring pairs I have with our winch and all of them show the tell-tale signs of a weld opposite of the stamped name 'Tost'. At least a close visual did not show any cracks. Maybe a simple 'dye-pen test is in order.
>
> Uli
> 'AS'


I seem to remember having read that the rings are made that way without any form of welding now. I suppose you could get the exact method used if you agree to pay for the technical norm:

http://standards.globalspec.com/std/1512827/din-ln-65091

It's cheaper than ordering from the original German institute: http://www.din.de/en/getting-involved/standards-committees/nl/standards/wdc-beuth:din21:84399512

Sean Franke

unread,
Jun 12, 2017, 2:12:03 PM6/12/17
to
Correct. Any connecting rings meeting Aeronautical Standard (LN) 65091 can't be welded.

Tost connecting rings pairs are made from steel fine cast. The small ring and large ring are casted into each other. This casting is an elaborate procedure.

Rings with welding seam are not from Tost and do not meet the Aeronautical Standard.

Sean Franke

Sean Franke

unread,
Jun 12, 2017, 7:56:05 PM6/12/17
to
Web page has been reconstructed. It has new detailed pictures. It also has a standard dimensions diagram.

http://wingsandwheels.com/tost-double-tow-rings.html

Sean Franke

Dan Daly

unread,
Jun 12, 2017, 11:06:29 PM6/12/17
to
Confused; one header has "New Edition of LN 54091" vs LN65091. Is 54091 new?

Thank you for publishing the dimensions of the tow ring; must get busy with a micrometer this weekend!

Dan

Sean Franke

unread,
Jun 13, 2017, 9:36:05 AM6/13/17
to
I shortened the heading from "New edition 2005 of LN 65091 (supersedes edition 1985-12)"

Sean Franke

us...@example.net

unread,
Jun 14, 2017, 7:28:35 PM6/14/17
to
On 11/06/2017 06:37, Benedict Smith wrote:
> I have personally seen 3 tost ring failures at my gliding club this season,
> (the
> last one only about 3 hours ago!) these were all the large rings on the
> strops,
> not the ring pair that goes to the release,

The only TOST rings are the ones that go to the release. Any others are
from your club's local blacksmith shop.

Actual TOST ring failures are almost unheard of.

0 new messages