Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Grob 104 Speed Astir
2,728 views
Skip to first unread message
Greg Delp
Jan 24, 2013, 9:20:09 AM1/24/13
to
I recently purchased a Speed Astir IIB and I'm in the process of getting it sorted for the next flying season. I'm interested in getting information from current and previous 104 owners regarding their tips, hints, and suggestions on flying the 104 as well as maintaining it and possible upgrades.
I'm currently replacing the pitot static lines and the wiring. I hate mice! The ship is equipped with an Edo Aire 551A which seems to be quite power hungry. There appears to be a voltage drop when transmitting as the Cambridge MKIV vario is affected every time the PTT is pressed. I'm reworking the wiring to get rid of any voltage drops including larger gauge wire and fuses versus the currently installed breakers. I will also reroute the wiring to try and limit any interference issues. I'm also considering making up a 14V battery as well if the problem persists after redoing the wiring.
Once these issues and the interior are replaced I will start to refinish the gel coat. When I bought the glider the control seals (other than the elasti-flap)were in really bad shape. The rudder seal was missing although I could see adhesive residue on the right side and there was a deteriorated fabric seal on the top of the stab and elevator gap. There were no turbulator strips either on top or bottom of the wing. In doing research I've seen the Eppler 662 will see some improvements with turbulators and have the info on placement from one of Udo's threads. Does anyone know what type and size of strips are best for this application? Also are other 104 owners using mylar seals on the rudder and elevator and if so what size seems to work best? Any internal seals?
I'd like to thank Guy "DDS" and "Skimmer" for there insights and help along the way so far.
I'm currently replacing the pitot static lines and the wiring. I hate mice! The ship is equipped with an Edo Aire 551A which seems to be quite power hungry. There appears to be a voltage drop when transmitting as the Cambridge MKIV vario is affected every time the PTT is pressed. I'm reworking the wiring to get rid of any voltage drops including larger gauge wire and fuses versus the currently installed breakers. I will also reroute the wiring to try and limit any interference issues. I'm also considering making up a 14V battery as well if the problem persists after redoing the wiring.
Once these issues and the interior are replaced I will start to refinish the gel coat. When I bought the glider the control seals (other than the elasti-flap)were in really bad shape. The rudder seal was missing although I could see adhesive residue on the right side and there was a deteriorated fabric seal on the top of the stab and elevator gap. There were no turbulator strips either on top or bottom of the wing. In doing research I've seen the Eppler 662 will see some improvements with turbulators and have the info on placement from one of Udo's threads. Does anyone know what type and size of strips are best for this application? Also are other 104 owners using mylar seals on the rudder and elevator and if so what size seems to work best? Any internal seals?
I'd like to thank Guy "DDS" and "Skimmer" for there insights and help along the way so far.
Dave Nadler
Jan 24, 2013, 10:04:29 AM1/24/13
to
On Thursday, January 24, 2013 9:20:09 AM UTC-5, Greg Delp wrote:
> There appears to be a voltage drop when transmitting as the
> Cambridge MKIV vario is affected every time the PTT is pressed.
Depending on serial number, some of those were EXTREMELY sensitive
> There appears to be a voltage drop when transmitting as the
> Cambridge MKIV vario is affected every time the PTT is pressed.
to RF, so you may not have a voltage drop.
> I'm reworking the wiring to get rid of any voltage drops including
> larger gauge wire and fuses versus the currently installed breakers.
cylindrical style (the latter very prone to corrosion
and of fuse and holder end caps, with consequent voltage drop).
Have fun !
Best Regards, Dave
Uncle Fuzzy
Jan 24, 2013, 10:54:08 AM1/24/13
to
On Thursday, January 24, 2013 6:20:09 AM UTC-8, Greg Delp wrote:
> I recently purchased a Speed Astir IIB and I'm in the process of getting it sorted for the next flying season. I'm interested in getting information from current and previous 104 owners regarding their tips, hints, and suggestions on flying the 104 as well as maintaining it and possible upgrades. I'm currently replacing the pitot static lines and the wiring. I hate mice! The ship is equipped with an Edo Aire 551A which seems to be quite power hungry. There appears to be a voltage drop when transmitting as the Cambridge MKIV vario is affected every time the PTT is pressed. I'm reworking the wiring to get rid of any voltage drops including larger gauge wire and fuses versus the currently installed breakers. I will also reroute the wiring to try and limit any interference issues. I'm also considering making up a 14V battery as well if the problem persists after redoing the wiring. Once these issues and the interior are replaced I will start to refinish the gel coat. When I bought the glider the control seals (other than the elasti-flap)were in really bad shape. The rudder seal was missing although I could see adhesive residue on the right side and there was a deteriorated fabric seal on the top of the stab and elevator gap. There were no turbulator strips either on top or bottom of the wing. In doing research I've seen the Eppler 662 will see some improvements with turbulators and have the info on placement from one of Udo's threads. Does anyone know what type and size of strips are best for this application? Also are other 104 owners using mylar seals on the rudder and elevator and if so what size seems to work best? Any internal seals? I'd like to thank Guy "DDS" and "Skimmer" for there insights and help along the way so far.
Hi Greg. I've had a Speed Astir II since 2004. I think Udo was talking about using the zig-zag turbulator tape that Tim sells on Wings and Wheels. Hope you enjoy your Speed Astir!
> I recently purchased a Speed Astir IIB and I'm in the process of getting it sorted for the next flying season. I'm interested in getting information from current and previous 104 owners regarding their tips, hints, and suggestions on flying the 104 as well as maintaining it and possible upgrades. I'm currently replacing the pitot static lines and the wiring. I hate mice! The ship is equipped with an Edo Aire 551A which seems to be quite power hungry. There appears to be a voltage drop when transmitting as the Cambridge MKIV vario is affected every time the PTT is pressed. I'm reworking the wiring to get rid of any voltage drops including larger gauge wire and fuses versus the currently installed breakers. I will also reroute the wiring to try and limit any interference issues. I'm also considering making up a 14V battery as well if the problem persists after redoing the wiring. Once these issues and the interior are replaced I will start to refinish the gel coat. When I bought the glider the control seals (other than the elasti-flap)were in really bad shape. The rudder seal was missing although I could see adhesive residue on the right side and there was a deteriorated fabric seal on the top of the stab and elevator gap. There were no turbulator strips either on top or bottom of the wing. In doing research I've seen the Eppler 662 will see some improvements with turbulators and have the info on placement from one of Udo's threads. Does anyone know what type and size of strips are best for this application? Also are other 104 owners using mylar seals on the rudder and elevator and if so what size seems to work best? Any internal seals? I'd like to thank Guy "DDS" and "Skimmer" for there insights and help along the way so far.
Uncle Fuzzy
Greg Delp
Jan 24, 2013, 12:53:03 PM1/24/13
to
Any idea which size zig zag or does it not make much difference?
Greg Delp
Feb 23, 2013, 5:41:55 PM2/23/13
to
Well I'm finishing up the interior restorations for now and moving onto the exterior. I'm thinking I will try and refinish the glider in Gel Coat as it will be a little more forgiving for my first refinish and I can do it at home without the worries and hazards of Poly. I've begun the hours of sanding with many many many more to go. I'd like to find a supplier for a Gel System. What are everyone's thoughts on which one to use based on pricing, ease of use, and long lasting? I don't want to do this again in the near future.
I'd also like to get some pointers from someone who has refinished a glider and preferably more than one in the North East/New England area. I live in CT and would travel to any of the nearby states to have someone look over my prep work and possibly help me spray the horizontal and elevator as a practice piece. I know there are lots of experienced folks nearby and I'd love to use their wisdom.
I'd also like to get some pointers from someone who has refinished a glider and preferably more than one in the North East/New England area. I live in CT and would travel to any of the nearby states to have someone look over my prep work and possibly help me spray the horizontal and elevator as a practice piece. I know there are lots of experienced folks nearby and I'd love to use their wisdom.
Brian
Feb 23, 2013, 11:36:18 PM2/23/13
to
I have been flying with a Cambridge C-Nav for 14 years now. I believe this is very similar to the Mark IV Vario. Try connecting to the Mark IV to it's own power source even if just temporarily to see if is a power issue or an interference issue. I had intermittent interference issues when I had the Terra 720 radio installed. I don't recall having any issues since installing the Becker Radio. I installed two batteries and ran the radio and vario off seperate batteries, so I know it was an interference issue.
Brian
HP16T
Brian
HP16T
Greg Delp
Mar 1, 2013, 11:55:45 PM3/1/13
to
I got the wiring all replaced and there is very little to no change in the vario indication now when transmitting over the com. On to the sanding.
Uncle Fuzzy
Mar 10, 2013, 1:29:57 AM3/10/13
to
On Friday, March 1, 2013 8:55:45 PM UTC-8, Greg Delp wrote:
> I got the wiring all replaced and there is very little to no change in the vario indication now when transmitting over the com. On to the sanding.
Excellent! It will be nice to have another Speed Astir back in the air.
> I got the wiring all replaced and there is very little to no change in the vario indication now when transmitting over the com. On to the sanding.
JS
Mar 12, 2013, 12:31:27 AM3/12/13
to
Just noticed this thread, but you've apparently fixed the vario or have it pretty much under control. In case the problem reappears or others reading this have the same crazy vario readings, here's my experience with what could be the same thing.
Do you have a CAI audio module? I had a similar problem in an LS4 with an old CAI vario and the AU-10 audio unit connected to it. Dave Ellis told me how to fix the problem... While many people insisted the radio needed a separate power supply from the vario!
There was an electrical ground loop built into the Cambridge AU-10. Cut the trace which connects the negative power bus to chassis inside the audio unit. If it's almost gone now, this may be due to new paint on the panel, new mounting screws or something like that.
The ground loop will only be a problem with a conductive instrument panel, which I think the G104 has.
Jim
Do you have a CAI audio module? I had a similar problem in an LS4 with an old CAI vario and the AU-10 audio unit connected to it. Dave Ellis told me how to fix the problem... While many people insisted the radio needed a separate power supply from the vario!
There was an electrical ground loop built into the Cambridge AU-10. Cut the trace which connects the negative power bus to chassis inside the audio unit. If it's almost gone now, this may be due to new paint on the panel, new mounting screws or something like that.
The ground loop will only be a problem with a conductive instrument panel, which I think the G104 has.
Jim
Greg Delp
May 3, 2013, 10:34:33 PM5/3/13
to
I finally got the chance to fly the 104. I have a few issues to try and sort out.
First the airspeed indicator seems to read lower than the actual speed. I will test the pitot static system for leaks as well as against a known good ASI.
Second, while checking out the Cambridge MKIV vario and the MKIV Director it was obvious that the Vario was not behaving correctly. I think it may be over compensated and hope the video below may help someone more experienced could determine if this is in fact the case. The Winter mechanical seems to indicate fairly accurately. It is connected to the TE probe and a flask. The MKIV is connected to the aft fuselage static ports(4) and pitot tube. The director is connected to the pitot tube and the forward fuselage static ports with the other pitot static instruments.
The mechanical vario seems to display correctly while cross checking the altimeter. The MKIV seems to indicate opposite especially while changing speeds, which can be seen in the video while changing flap settings. Then it sometimes stabilizes and almost matches the mechanical.
Any suggestions? I haven't had the chance to fly on a smooth day yet.
http://www.youtube.com/watch?v=d6yhK_Fxo18&feature=share&list=UUvGOQosj5Kp9RTsTlUdCZJw
First the airspeed indicator seems to read lower than the actual speed. I will test the pitot static system for leaks as well as against a known good ASI.
Second, while checking out the Cambridge MKIV vario and the MKIV Director it was obvious that the Vario was not behaving correctly. I think it may be over compensated and hope the video below may help someone more experienced could determine if this is in fact the case. The Winter mechanical seems to indicate fairly accurately. It is connected to the TE probe and a flask. The MKIV is connected to the aft fuselage static ports(4) and pitot tube. The director is connected to the pitot tube and the forward fuselage static ports with the other pitot static instruments.
The mechanical vario seems to display correctly while cross checking the altimeter. The MKIV seems to indicate opposite especially while changing speeds, which can be seen in the video while changing flap settings. Then it sometimes stabilizes and almost matches the mechanical.
Any suggestions? I haven't had the chance to fly on a smooth day yet.
http://www.youtube.com/watch?v=d6yhK_Fxo18&feature=share&list=UUvGOQosj5Kp9RTsTlUdCZJw
John Cochrane
May 3, 2013, 10:39:18 PM5/3/13
to
Buy a new vario. Really, this is ancient equipment, and nothing --
nothing -- helps your soaring performance more than a really good
vario
John Cochrane
Greg Delp
May 3, 2013, 11:34:41 PM5/3/13
to
A LX Nav V7 is in the future plans but I'd like to get this one working as well as I can for now.
Uncle Fuzzy
May 7, 2013, 12:47:39 PM5/7/13
to
Greg Delp
May 15, 2013, 6:01:39 PM5/15/13
to
I got a chance to test the pitot/static system today and came up with the following results. It seems both problems are most likely related as the pitot systems ties the airspeed indicator, Vario, and Director together.
The pitot system did indeed have two leaks. The first and largest is inside the Cambridge MKIV Vario itself. The second smaller leak is inside the MKIV Speed Director. If I clamp off these two pitot connections just outside of the units, the airspeed indicator will hold an almost constant airspeed(a very slow leak of one knot or so in ten minutes). If I clamp off one unit at a time, the Director leak will drop the airspeed at about 10 kts/minute, and the Vario will drop the airspeed almost instantaneously. Since these are quite old and aren't service by Cambridge anymore I decided why not crack the cases and see what I can find. Both units have internal tubing from the case ports to what appear to be pressure transducers. The tubing looks to be in good shape and well sealed. Does anyone know if these sensors are some sort of calibrated leak/flow type of pressure sensor or should they be sealed with no leaks? Would it make a difference if the electrical power was on or off on the units?
If I can't get these units to seal the pitot system better it looks like a new vario will be more urgent than I had planned. I would still love to use these units for now if anyone has any further suggestions. Until then it looks like isolating the airspeed indicator and using the mechanical vario is my only option.
The pitot system did indeed have two leaks. The first and largest is inside the Cambridge MKIV Vario itself. The second smaller leak is inside the MKIV Speed Director. If I clamp off these two pitot connections just outside of the units, the airspeed indicator will hold an almost constant airspeed(a very slow leak of one knot or so in ten minutes). If I clamp off one unit at a time, the Director leak will drop the airspeed at about 10 kts/minute, and the Vario will drop the airspeed almost instantaneously. Since these are quite old and aren't service by Cambridge anymore I decided why not crack the cases and see what I can find. Both units have internal tubing from the case ports to what appear to be pressure transducers. The tubing looks to be in good shape and well sealed. Does anyone know if these sensors are some sort of calibrated leak/flow type of pressure sensor or should they be sealed with no leaks? Would it make a difference if the electrical power was on or off on the units?
If I can't get these units to seal the pitot system better it looks like a new vario will be more urgent than I had planned. I would still love to use these units for now if anyone has any further suggestions. Until then it looks like isolating the airspeed indicator and using the mechanical vario is my only option.
Dave Nadler
May 15, 2013, 7:04:20 PM5/15/13
to
On Wednesday, May 15, 2013 6:01:39 PM UTC-4, Greg Delp wrote:
> The pitot system did indeed have two leaks. The first and
> largest is inside the Cambridge MKIV Vario itself.
> The second smaller leak is inside the MKIV Speed Director.
IIRC the ASI is implemented with a calibrated leak and
> The pitot system did indeed have two leaks. The first and
> largest is inside the Cambridge MKIV Vario itself.
> The second smaller leak is inside the MKIV Speed Director.
flow sensor in that gear; the leak is normal...
Hope that helps,
Best Regards, Dave
Greg Delp
May 15, 2013, 9:23:31 PM5/15/13
to
Any idea if that is true in the MKIV Vario as well? It seems like the leak in the director would be small enough to not cause much of an issue with the actual ASI but the larger leak in the vario is definitely causing low airspeed indications on the ASI. The director does seem to indicate a reasonable push or pull command and average climb/descent based on the vario's output but the vario is indicating opposite of what it should like it's overcompensated when the gliders airspeed is changing then seems to stabilize pretty close to where it should be and somewhat matches the Winter mechanical.
ahar...@gmail.com
May 19, 2013, 8:55:41 AM5/19/13
to
Soft landings...
soarin...@gmail.com
Jul 25, 2017, 4:39:16 PM7/25/17
to
Just figuring out the Rec.aviation.soaring thang .. Uncle Fuzzy has changed ownership hands, and is now dubbed "Uber Fluggen" .. Uncle Fuzzy passed away about two years ago, succumbing to an aggressive malignant brain tumor. We miss him at our club ..
As I'm learning UF, I found it's meant for a smaller person than I. I could lose some 15 lbs, but that might take years and cost lots of lives .. I'm at 193 now.
Instead, I had a couple of questions to ask the G104 Speed Astir II community ..
- the side panels that cover the control links result in a rather narrow fit, and while I fit snugly, this past summer was the first time I had a chance to fly for more than 3 hours. I discovered that the snug fit, combined with the wider instro panel, causes some cramping in my legs after 2.5 hours, so I was wondering if anyone experienced this and if they thought making mods to the side panels to widen them (without interfering with the controls) .. I'm uncertain as to how Uncle Fuzzy coped - he was wider than I, but perhaps it's because I'm a couple of inches taller than he was .. ?
- I had the unusual fortuosity of having both my wing stands and both wing sleeves severely damaged the same day .. by two different personnel. One of the sleeves is workable, but the other is not .. does anyone know of spare wing sleeves, or have they made their own .. ?
Thanks!
Uber Fluggen
As I'm learning UF, I found it's meant for a smaller person than I. I could lose some 15 lbs, but that might take years and cost lots of lives .. I'm at 193 now.
Instead, I had a couple of questions to ask the G104 Speed Astir II community ..
- the side panels that cover the control links result in a rather narrow fit, and while I fit snugly, this past summer was the first time I had a chance to fly for more than 3 hours. I discovered that the snug fit, combined with the wider instro panel, causes some cramping in my legs after 2.5 hours, so I was wondering if anyone experienced this and if they thought making mods to the side panels to widen them (without interfering with the controls) .. I'm uncertain as to how Uncle Fuzzy coped - he was wider than I, but perhaps it's because I'm a couple of inches taller than he was .. ?
- I had the unusual fortuosity of having both my wing stands and both wing sleeves severely damaged the same day .. by two different personnel. One of the sleeves is workable, but the other is not .. does anyone know of spare wing sleeves, or have they made their own .. ?
Thanks!
Uber Fluggen
Soartech
Aug 2, 2017, 11:57:41 AM8/2/17
to
> I discovered that the snug fit, combined with the wider instrument panel, causes >some cramping in my legs after 2.5 hours, so I was wondering if anyone >experienced this and if they thought making mods to the side panels to widen them
I also am subject to cramping in my legs after 2.5 hours due to an old injury. I found that taking 3 Advil just before flight completely eliminates this problem and sometimes has the added benefit of reduced urge to pee.
I also am subject to cramping in my legs after 2.5 hours due to an old injury. I found that taking 3 Advil just before flight completely eliminates this problem and sometimes has the added benefit of reduced urge to pee.
SoaringXCellence
Aug 2, 2017, 11:14:52 PM8/2/17
to
Sorry to contribute to thread drift, but:
Interesting observation about the Advil (Ibuprofen).
I sometimes get cramps in my calf late at night. I've discovered that taking two Aleve (naproxen sodium) prevents the cramps from occurring at night. I'll have to try it in the glider too, as my feet get cold and crampy at altitude.
Mike
Interesting observation about the Advil (Ibuprofen).
I sometimes get cramps in my calf late at night. I've discovered that taking two Aleve (naproxen sodium) prevents the cramps from occurring at night. I'll have to try it in the glider too, as my feet get cold and crampy at altitude.
Mike
0 new messages