Solax X3-hybrid G4 Firmware Download

[Artemisa Sommers]

<div>the X1 hybrid g4 will need firmware updates to charge a battery correctly overnight.</div><div></div><div>my cheap rate overnight charge period is 2-6am, if battery charged at all it started at 4.50am so would not give a full charge. contacted solax and there were firmware updates for both my inverters, both wifi modules and the battery. solax installed remotely and now charging correctly at 2am :).</div><div></div><div></div><div></div><div></div><div></div><div>solax x3-hybrid g4 firmware download</div><div></div><div>DOWNLOAD: https://t.co/RZLadSaIfF </div><div></div><div></div><div>Just wanted to add back a little information i have. It maybe known but i just discovered that the solax app it is possible to get into the full settings by using pin code 6868. Hope this helps people who wanted the old settings back after updates removed them.</div><div></div><div></div><div>Step 1: Please save the "Upate" firmware in your U disk first, and press the "Enter" button on the machine screen for 5 seconds to enter the shutdown mode. Then unscrew the waterproof cover, insert the U disk into the "upgrade" port at the bottom of the inverter.Step 2: Find the "Upgrade" port of the inverter, unplug the monitoring module (Pocket WiFi/ Pocket 4G/Pocket LAN) by hand, and insert the USB flash drive.Step 3: LCD operation, enter the upgrade interface "update", as shown below(a): Please press the up and down keys to select ARM, then press the bottom of the page to select "OK", press the enter key to enter the software version interface;Step 4: Please confirm the new firmware version again and select the firmware to upgrade. The upgrade takes about 20 seconds. (d) When it is completed, the LCD screen returns to the "Update".614.00898.00</div><div></div><div> df19127ead</div>