Last week, BOTH windows stopped working from the master switch, and
the passenger window wouldn't work from its switch, either. But when
either switch is pushed in either direction, I can hear a faint click
from inside the door panels.
The driver/master switch shows 11.5V input (on small digital
multimeter) and a good ground to chassis (as measured on an analog
Simpson 260 ohmeter). When I operate the switch, the respective
outputs show 9.5 volts. They're all there, on the correct output
wires, when the given switch is pushed. All I get is the soft click,
no motor operation on either door. The power door locks work fine.
Any ideas?
I'm not real familiar with this model, but there may be a master control
in the driver's door that controls all the windows.
Seems to me I remember from a problem with a Windstar we sold, and also
with a friend's Mystique, there is a relay in the door that goes bye-bye.
You can get a repacement from Ford for about $65, or a 'generic' from
AutoZone for ~$30. Guess what the guy with the Mystique replaced his with? ;)
I can't remember if it takes some bass-ackward engineering to make the
generic work, or if it is an exact replacement. I think it just clicks
right in IIRC.