Door lock switches on 1996 SW-2 - difficult?
marcodbeast
replacing the driver's side door lock switches on my '96 SW-2 be? The door
looks like it might come open fairly easily, but I'm partially disabled and
don't want to try it myself if I'm liable to get stuck halfway through.
The spring has broken or moved inside the switch, which now stays in
position and causes some sort of continual cycling inside the doors til I
move it - I'm afraid for the mechanisms.
Thanks for any thoughts!
John Clear
Your description is a little hard to follow, but I'm assuming it
is the power lock switch that isn't working. You don't have to
take apart the door to access that. The one on my 1996 SL1 broke
(the centering pin snapped, so it would stay pressed against the
'lock' setting). The switch is just held in by some plastic tabs
(top/bottom, IIRC). Work gently with a thin screw driver to pop
it out. I replaced it with the one from the passenger side, and
put the busted one (disconnected) on the passenger side for aesthetics.
John
--
John Clear - j...@panix.com http://www.clear-prop.org/
marcodbeast
Sweet, thanks much!