Help. Accord '97 Tape Head Unit ...says "CLEAn"...How do I get rid of this?
Steve9013
'94 Accord Coupe. "...reset the indicator by pressing the Preset 6 button
while the system is in the tape operation mode. Hold the button until you hear
a beep and the CLEAN indicatoe goes out."
hope this helps, and maybe next time you'll look in the owner's manual first!
:)
\\
Mitanga
Chuck wrote in message <35c84bbe...@news.alt.net>...
>I used a cleaning tape, and it's still saying this. I looked at a
>similar discussion in rec.audio.car, but there was no consensus on how
>to manually get rid of the "CLEAn" indicator in the LED display.
>Thanks. I think it's an Alpine unit also...btw...
Most likely, you will have to re-set the indicator in the display.
Like the mechanical indicator in the dash of Hondas, which shows you
when to do maintainence (which you re-set with the ignition key),
you'll probably have to reset the stereo using a very small metal
rod (such as a bent paper clip) and push it into a hole in the stereo's face
to reset the indicator. I know that at least some of the Honda factory
stereos from the late 1980's were actually made by Alpine.
R...@ohsu.edu
>From: Ch...@chuckie.com (Chuck)
>Subject: Help. Accord '97 Tape Head Unit ...says "CLEAn"...How do I get rid of this?
>Date: Wed, 05 Aug 1998 12:12:00 GMT
>I used a cleaning tape, and it's still saying this. I looked at a
>similar discussion in rec.audio.car, but there was no consensus on how
>to manually get rid of the "CLEAn" indicator in the LED display.
>Thanks. I think it's an Alpine unit also...btw...
This is covered in the owner's manual - something like holding one of the
station buttons in while turning on the radio........... It's been 18 months
since i had to do it so i'm sorry if the details are somewhat fuzzy....