CRX OIL DRAIN CRUSH WASHER: What size is a 1-over washer?
Meatman
like as it was stripping out. I know the routine, but the damage
started before I got to it :-) "I" use a torque wrench :-) Still buy
Honda filters but the only way to get the stock crush washer (dealer)
to fit is to wrench it on in a vice ever so tenderly. So what size am
I looking for...or how to tell on my own? Just curious if anyone has
the specs on the tip of their tongue. Don't waste a lot of time on
this, pls. Also, for those who don't know...basically walk into your
dealer and ask for 'x' number of oil filters and they won't ask the
model/type for anything from '86-2010 (which is almost everything).
AFAIK the only difference is the S2000 filter, IF IF IF I remember
correctly? Anyway, thanks again Beamer, Tigger, Nasty and the
gang! :-)
Tegger
news:e0b120de-00b8-4f7a...@d19g2000yql.googlegroups.com:
> Had go with the 1-over oil drain plug from Advance/AZ/Reilly' or the
> like as it was stripping out. I know the routine, but the damage
> started before I got to it :-) "I" use a torque wrench :-) Still buy
> Honda filters but the only way to get the stock crush washer (dealer)
> to fit is to wrench it on in a vice ever so tenderly. So what size am
> I looking for...or how to tell on my own? Just curious if anyone has
> the specs on the tip of their tongue.
It's 7/8" overall diameter, with a 9/16" hole in the middle.
The OD's not really important, so an inch OD would do.
You can get nylon and other types of washers at any auto parts store.
> Don't waste a lot of time on this, pls.
I have some sitting right here.
> Also, for those who don't
> know...basically walk into your dealer and ask for 'x' number of oil
> filters and they won't ask the model/type for anything from '86-2010
> (which is almost everything). AFAIK the only difference is the S2000
> filter,
There is just one filter that fits most models (15400-PLM-A02), but
there are a couple of other sizes in use, so they SHOULD ask you what it's
going on.
--
Tegger
Meatman
Nice one, Lenny Bruce. I meant don't waste too much time trying to
find the answer/research. If you know...then you know. That would be
sufficient info.
> There is just one filter that fits most models (15400-PLM-A02)...
My point exactly. "I need an Accord filter"."I need a CRX filter".
9.7/10 times (oh, and they know me) if they threw a filter at you/me,
it would fit. Period. Pretty universal in the filter department by a
friggin long shot.
> there are a "couple" of other sizes in use...
yep. I noted one of the two you mentioned. A "couple'" is two.
S2000 is one. What's the other one, honestly? Curious now.
Ridgeline?
>> You can get nylon and other types of washers at any auto parts store.
Now back to sincerity: After doing the one-over plug I figgered I
stay with the alum crush as the dealer does. No difference using
nylon or similar so long as it has a crush/formable factor to it and
won't melt/deform under heat...as compared to stiff generic steel
washer?? I've never tested any other options but do remember nylon
washers on a few cars over time. Maybe the best option considering my
situation. And cheapest.
And, yes, actually...despite the sarcasm...thanks Tigger! Much
obliged yet again :-)
Kevin
Tegger
c6e71d...@k9g2000yqi.googlegroups.com:
>> > Don't waste a lot of time on this, please...
>
> Nice one, Lenny Bruce. I meant don't waste too much time trying to
> find the answer/research. If you know...then you know. That would be
> sufficient info.
>
>> There is just one filter that fits most models (15400-PLM-A02)...
>
> My point exactly. "I need an Accord filter"."I need a CRX filter".
> 9.7/10 times (oh, and they know me) if they threw a filter at you/me,
> it would fit. Period. Pretty universal in the filter department by a
> friggin long shot.
>
>> there are a "couple" of other sizes in use...
>
> yep. I noted one of the two you mentioned. A "couple'" is two.
> S2000 is one. What's the other one, honestly? Curious now.
> Ridgeline?
Probably. And an Acura version (maybe the 5-cylinder engine). I'd have to
ask my parts guy to be sure.
>
>>> You can get nylon and other types of washers at any auto parts store.
>
> Now back to sincerity: After doing the one-over plug I figgered I
> stay with the alum crush as the dealer does. No difference using
> nylon or similar so long as it has a crush/formable factor to it and
> won't melt/deform under heat...as compared to stiff generic steel
> washer??
You can use just about any kind of washer you want. The dealer's is the
/correct/ one, but if your drain plug doesn't hold too well, it may not be
the best choice for you anymore.
I did some experimentation years ago, and found that gaskets made of nylon
or other gasketing materials held just fine with 20# of torque on the bolt.
> I've never tested any other options but do remember nylon
> washers on a few cars over time. Maybe the best option considering my
> situation. And cheapest.
>
> And, yes, actually...despite the sarcasm...thanks Tigger! Much
> obliged yet again :-)
>
I try.
--
Tegger
Al
called him Tegger (as derived from "Integra") instead of Tigger (as
found in Winnie-the-Pooh)
Tegger
> pssst: Hey there Christopher Robin, he might appreciate it if you
> called him Tegger (as derived from "Integra") instead of Tigger (as
> found in Winnie-the-Pooh)
"Tegger" is in fact derived from both Integra AND Tigger. When I thought of
the name, my daughter was very small, and Tigger was her favorite Pooh
character.
I later discovered I was far from the first to use "Tegger" as a handle.
--
Tegger
Meatman
...and we appreciate it. Smooch!!! (But only in a smart-ass kinda
way!) :-)
<<Hey there Christopher Robin, he might appreciate it if you
called him Tegger (as derived from "Integra") instead of Tigger (as
found in Winnie-the-Pooh) >>
Heh-heh! No offense intended. Me and a buddy bastardize every name,
title, phrase, euphemism, etc possible as it comes to our minds. It's
just a "thing". Nothin' personal except that it's fun...for me
anyway!! :-) Tigger, Beamer, and Nasty. AKA: TEGGER, JIM BEAM, and
ELMO SHAGNASTY. A little levity mixed with proper 'thanks' and
respect can't hurt, right? Besides, (laughing to self!!!!!!), Tigger
has heard much worse! :^) BUT THE REAL QUESTION IS: What's the
most wonderful thing about Tiggers???? Look it up..
-
Sub-thread done! Now, back on topic, people. :-)
Meatman
in case the opportunity shows itself in the future. I'll let ya
pick! All in fun. :-) Happy Honda-ing everyone!