Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

99 Explorer Dash Lamp replacement Extra Connector?

1 view
Skip to first unread message

Steven L. Finberg

unread,
Oct 10, 2009, 11:13:40 PM10/10/09
to

Finally got around to relamping the instrument panel
in my 99 Explorer Sport.

First a few word on the process.

There was no need to remove any of the knobs as mentioned
on line or in the factory manual.
There was no need to unbolt the emergency brake pull.
The metal reinforcement panel need only be loosened not removed.

Now my question.

There is an electrical connector that blind terminates
on the far right side of the plastic panel holds the
headlight switch. It has 4 or 5 wires in a 6 hole body.
There is a molded latching cavity in the panel, but
no connections. I couldn't find any reference to this
connector.

What's it for?

Steve F

*******************************************************************************
Steve Finberg W1GSL w1...@mit.edu
PO Box 397082 MIT Br Cambridge MA 02139-7082 617 258 3754
*******************************************************************************

0 new messages