Schematics?

[somebodyelse]

I recently found a Hammond H-112 in the garbage. It had been rained upon,
so the exterior was shot. The interior was reasonably dry, though. I got
quite a bounty. I want to build a stereo push-pull with 4 6bq5's and a
separate mono (going to channel stereo input down) bass amp using 2 6L6's.
I have quite a few 12au7's for preamp tubes. I also have a pair of 5ar4
rectifier tubes for the power end of the deal. Anybody have any schematics
for the two amps above? I'm not terribly experienced at this, but I can
find my way around schematics. I am convinced of this.....there is no good
substitute for vacuum tube sound. I will be grateful for any input.

[Patrick Turner]

somebodyelse wrote:

Maybe you can adapt something from my website at

http://www.turneraudio.com.au

In particular, the circuit at http://turneraudio.com.au/10-10amp6gw8.gif

would suit you. It uses 6GW8, but no reason why 6BQ5 could not be used
with 12AX7 driver tubes.

The preamp at http://turneraudio.com.au/PreampApr2000.gif
also has some some ideas you could use for phono, tone control,
and a line stage.

Good luck with the project.

Patrick Turner.

[Henry 007]

Try www.duncanamps.com

go to tube search, input 6BQ5 and try schematics that use this tube.

"somebodyelse" <somebo...@uselessbastard.net> wrote in message
news:Um3h9.30981$AY5.11...@e3500-atl1.usenetserver.com...