Ken,
Prices at the LFS usually are higher than mail-order. You are pretty much
stuck on the tank prices as they are too costly to ship. If you are willing
to do it in parts it can be done cheaper.
The mag 12 would work well but you could do it with a 9. Turnover actually
should be higher overall but can be accomplished by the pump and a few
powerheads or wavemaker in the system to get this figure. Pump is available
for about 55-60 online. The protein skimmer can be had for less by same
maker. CS8-1can be gotten for 429.00 or a CS6-2 which is fine for that tank
for 369.00 at premium aquatics. You don't need a wet/dry but can do a DIY
sump fuge for less and a little work. Bio balls can actually cause nitrate
problems if not kept in check. UV sterilizer is not necessary at this time
and its debatable on the pros/cons of it in a reef softie tank. A RO/DI unit
that works fine for reef tanks can be had on Ebay and the like for under 100
for a 6 stage unit.
Check out reefcentral.com and the forums to get some ideas. I was in the
same boat you are in now last year and saved $$$$ looking around for parts
and just getting the tank at the local fish store
Just my opinion as I`m sure others will have theirs. I`ve done a 65gal and
90 in the last 8 mths this way.
Good post. I agree with every word. I would like to add that the
wet\dry filter would be pointless in most reef tanks as the the Live
Rock takes care of all biological filtration needs.
billy
It's a workable method, but you have to be on top of your maintenance at all
times in order to keep nitrates down. Especially since you say you'll be
light on LR at first.
Whether or not you can ever remove the bioballs will be completely dependent
on the total amount of LR. If you have enough to support the systems
bioload, then you could remove the BBs at any time (slowly, of course). If
you never install enough LR to support the load, then you will need to keep
at least some of the bioballs to compensate.
HTH,
Kev