How can I attach wrought iron headboard to bedframe????
ali
don't want to spend any money on an old bedframe. Any suggestions would
gladly be appreciated. I looked everywhere online! Please any thoughts would
help. Thanks for reading my post. Good day all. : )
http://www.flickr.com/photos/43388886@N08/
vince garcia
Well, you're trying to join mismatched pieces together. There is no
really easy way to do that, so my best suggestion is to jury rig
something like laying a piece of plywood against the headboard and
behind the bedframe so that the bedframe and mattresses will press
against it and keep the headboard from falling over. Or, attaching some
sort of bracket to the wall, and then anchoring the headboard to the
bracket.
nos...@nevis.com
Pipe clamps* and a piece of wood. Bolt a piece of wood to the bedframe
mount so that it sticks up about two inches on the top and bottom, put
the pipe clamps ( top and Bottom) around the legs of the iron bed frame
and screw or bolt into the block of wood .
*http://www.plumbingworld.com/images/2hole-galvanized-pipe-strap-clamp.jpg
David Nebenzahl
I second that emotion.
Specifically, get yourself some 1x4 wood (actual dimensions 3/4" x
3-1/2"), available at any lumberyard/home improvement store (e.g., big
orange box). Cut a couple short pieces, say 6" long. Attach them to the
ends of the bedframe using short 1/4" carriage bolts (the kind round
heads instead of hex heads), with the round heads against the outside of
the wood. Then attach the pipe clamps to the wood (2 per side) using
screws, nuts and washers. The "headboard" will go under the clamps.
If the resulting kluge[1] looks too ugly, you could paint it to match
the bedframe.
[1] This is, I am convinced, the correct spelling of this term.
Pronounced to rhyme with "stooge". Not "kludge", which would rhyme with
"fudge".
--
Found--the gene that causes belief in genetic determinism
Kris Baker
news:iNWym.77997$4t6....@newsfe06.iad...
Have you thought of attaching it to the wall, instead? It will
be much steadier. Really.
Kris
asdf
I think I've told this story before...
Once I had a problem and just happened to be near a body shop, you
know, the place where they work on cars. I got to thinking that those
guy know how to weld.
For not much money I got my problem fixed and the guys who did it had
some fun and were proud that they'd figured it out.
It doesn't cost anything to ask and there are some old boys out there
who are wicked smart.
T.
David Nebenzahl
> On Oct 7, 12:44 am, "ali" <cagney...@htomail.com> wrote:
>
>> I want to attach an antique wrought iron headboard to my new bedframe. I
>> don't want to spend any money on an old bedframe. Any suggestions would
>> gladly be appreciated. I looked everywhere online! Please any thoughts would
>> help. Thanks for reading my post. Good day all. : )
>>
>> http://www.flickr.com/photos/43388886@N08/
>
> I think I've told this story before...
>
> Once I had a problem and just happened to be near a body shop, you
> know, the place where they work on cars. I got to thinking that those
> guy know how to weld.
>
> For not much money I got my problem fixed and the guys who did it had
> some fun and were proud that they'd figured it out.
>
> It doesn't cost anything to ask and there are some old boys out there
> who are wicked smart.
No doubt. But do you really think the OP wants their "headboard" welded
to their bedframe permanently? (If so, then I agree: problem solved.)
asdf
welded
to their bedframe permanently? (If so, then I agree: problem solved.)
Good question. Maybe not. I think I just like telling that story.
In my part of the world that's called a Cadillac frame. I've got a bed
sitting on one as we speak. No head board. Would I really want one
welded to an iron bed frame? Probably not.
It's cheap though. I think a Cadillac frame costs (maybe more now)
$25. If I just didn't care... maybe it would be OK.
OK, overall, I have to agree with you.
T.
asdf
Vigorous fucking. If you have never had a bed fall apart you have
either been richer than I have been or you just haven't been trying.
By all means, seriously, put this bed together with block and tackle.
You'll always have the fond memory of the time you fucked the bed to
pieces.
T.
Kris Baker
Which is exactly why attaching it to the wall, will eliminate
that problem.
Worked for us. We just glued a bit of foam to each of the two
points where the bed frame would touch the headboard.
No banging. Well....unheard banging.
Kris
T 13
David Nebenzahl
> http://www.passiveaggressivenotes.com/page/68/
Dunno why you posted that.
But since you did, that first item (the mixed-up vending machine)
reminds me of when I used to play in a community orchestra that
rehearsed and performed at the local university's auditorium. On breaks
we'd head for the hallway, wherein there was this somewhat strange
vending machine that dispensed both coffee and--get this--chicken soup.
Nothing like a cup of coffee with a little /schmaltz/ floating on top.
Or a bowl of chicken soup with a sugary caffeine aftertaste ...
T 13
Pardon, further down that page is a note someone left about the
neighbors squeaky bed. Should have said something about scrolling
down.
In the movie theater in about 1961 in my town there was a coffee
machine that also dispensed chicken soup. Thanks hadn't thought about
that in years. And yes, as I recall, they did get a bit mixed
sometimes.
T.
ali
Allison
"T 13" <ghostlyc...@gmail.com> wrote in message
news:6d17515d-a5ec-4e7d...@m33g2000pri.googlegroups.com...