Ultracopier Ultimate Windows 64 Crack
Doris Joo
UltraCopier is a simple file synchronization/file copying utility which offers more options than your typical Windows Explorer-powered tool. It effectively manages file copying and moving with customizable options.In most cases, creating copies of files shouldn't be too much of a hassle, but when it comes to dealing with large volumes of information or the possibility of Windows spitting out cryptic errors, then programs like UltraCopier definitely come in handy.UltraCopier is faster and offers more options when you're moving a large amount of data and manages it much more efficiently.When you're not using this application, it sits in the Windows tray.. easily accessible for when you want to use it net.UltraCopier is highly recommended for users who often move files around and need a little bit more configurability than Windows' built-in tool.Features of Ultracopier
- Customization: Ability to set transfer speeds and specify the number of retries for failed transfers.
- Error handling: Automatically retry failed transfers and skip files that can't be transferred, so you don't have to worry about manually troubleshooting errors.
- Improved Speed: Much faster than the default file copying utility, particularly when transferring large files or multiple files at once.
- Resume support: If a file transfer is interrupted, Ultracopier can automatically resume the transfer from where it left off, saving you time and frustration.
- Transfer management: Pause, resume and cancel file transfers, as well as view the progress of each transfer.
- Unicode: Full and native management of Unicode.
- User Account Management: UAC support for windows.
I like to keep things organized on my system especially when it comes to file downloads. While all downloads end up in a single location on my system, I like to copy them to specific folders every once in a while as it improves manageability. I put documents into a folder, and do the same for program installers, portable applications, media files, and other file types.
If you're like me, you probably have multiple copying tasks running sometimes. Depending on the read/write speed of your drives, it could take a long time to run them simultaneously. Windows 10 does offer a pause/resume option in File Explorer which makes it a tad easier. There are alternative options such as TeraCopy or Total Copier which have been around for a long time, but even if you run copy job after copy job, you may end up waiting a long time.
When I was halfway through the reviewing process, I discovered that the developer added a Bitcoin Miner to a specific version of the program a few years ago to support development; this was discovered by a user and the developer removed the miner from the application afterwards.
A Virustotal scan shows that the installer is clean, there are no hits at the time of writing. The developer did acknowledge the issue and resolved it; the GitHub page is still up even though it could have been deleted easily.
Once installed, Ultracopier replaces the Windows Explorer's copying functionality with its own. Whenever you run copy, move, cut, and paste operations, Ultracopier is used instead of the native Windows copy functionality.
The Ultracopier interface is displayed during the process; it displays the source and destination folder, progress information, the amount of data that is left to copy, the remaining time (this was completely inaccurate during my tests similarly to how Windows cannot provide a good estimate of the remaining time), and the transfer speed in MB/s.
At the moment Ultracopier v2 is missing a few features which were present in v1, e.g. checksums are not available yet. The option to pause the copy doesn't work and speed limit isn't functioning either. The developer has promised to add these back in the future. Frankly, these are some of my favorite features in copier applications.
Note: Though the program is free and open source, a premium version is available as well. The interface has a line of text (which is in fact a link) that requests you to buy the Ultimate version to support the development.
The program's secondary interface can be accessed from the system tray icon. The menu here has two primary sections: Add copy/moving and Options. Add copy/moving has three more options: Add copy, Add transfer and Add Move. All require that you select the source and destination folders.
The add transfer option brings up the Ultracopier pop-up window into view and you will need to click on More to access the transfer pane. It's pretty straightforward, you add files and folders, manage the queuing order and start the transfer.
The Copy Engine tab has some nice options such as "Transfer the file rights, Keep the file date, move the whole folder, follow the strict order, and create full path if it doesn't exist". These aren't crucial options, though it's nice to have some control. You can manually tweak the performance settings (threads and buffer), I didn't because I wanted to review the program with its default settings. There are a few plugins available on the GitHub page for additional functionality.
You may notice that Windows Explorer tests are faster here. That's because it seemed to use some sort of caching, and the copying process sort of started with the progress bar half-filled at times. I had to clear the clipboard, restart Explorer's process by copying something else and repeat the tests. It also shot up at times, using more CPU power. I'm not sure if the results will be similar in Windows 7 or 8.
I repeated these tests with Big Buck Bunny MOV and AVI videos (which I usually use for testing video related software), and the speeds were quite similar. There is not a huge difference in regards to speed but that is to be expected. It is possible that you could get more out of the program under certain configurations.
Ultracopier was written in Qt. I think that it could be a good replacement for TeraCopy, once the missing features are added. There is a portable option in the settings of the installed version (yes you read that correctly), though I didn't test it.
For me as a system admin, I was a big fan of Teracopy but now using Gs richcopy360 , the reliable and affordable one that saves our time in every servers migration.multi-threading and long path names problems were the big obstacles every time we tried to transfer data from server to another, but no problems now with any kind of data whatever it sized. but the big cons of gs richcopy360 that it does not support Linux, so we looking forward to using Ultracopier in Linux servers environment with using gs richcopy360 to windows .
Original Supercopier v2.23 from over ten years back was perfect, had accurate time remaining, working pause function, rearranging copy queue, accurate transfer speed display, faster than Windows, too; configurable add to queue options, all you needed. Fun fact, it still works in Win10!
I am personly a big fan of ExtremeCopy free (there is also a Pro version) 2.3.4 (there is not only a 32 bit and 64bit version but also a portable) it can reach to 8 times of Windows copying function.copy or move your file(s)/folder(s) as usual.
Its already 6 years old but it still works like a charm.
They answered that the 33 Mail disposable address I had used to register was not allowed. I use disposable addresses for all my accounts, even for my banks (which accept them). Microsoft-owned GitHub does not.
Hi, I am looking for a windows utility that will run as a service to move (source files should be deleted once the move is successful.) files to CIFS / SMB shares at regular intervals. The application should have error checking and logging features and be configurable with regards to copy jobs that it can handle.
Robocopy has been said to be buggy with XP era and earlier OSes. Imagine Powershell v1-v2 would limit things, as well. Sounds a case where extra programming and extra logic would need be crafted to accommodate the older OSes. Testing with Richcopy may be helpful for overcoming the stalled task.
I need this solution for install my own copier software (C#), please if somebody knows about any register key or system 32 program to override windows default copier for another. I've been investigating months and nothing.
Ultracopier is a Free Open Source software, which means that you can have the best Ultracopier for your organisation needs. Ultracopier was created by J.M. Rouder (a.k.a. ""mink" " Rouder) in 1990, based on the technology of parallel typing, which was originally developed in military intelligence.
Ultracopier has a simple, yet powerful user interface, which is great for small office organisations. Ultracopier was developed to perform the tasks of both a file copy software and a graphics editor. The advantage of Ultracopier over similar products is that it supports all the popular file formats such as PDF, JPEG and PNG, as well as many other formats. Ultracopier also allows users to specify a maximum compression level on all the data copied, so that you won't get any loss of quality when transferring large files.
Ultracopier works well with any version of Windows. Apart from this, ultracopier works well with all flavours of Linux, including Fedora. I am personally using Ultracopier version 5.2, which is a relatively recent release, and has been working extremely well for me. To download the latest version of this brilliant file copy utility, visit the link below. a lot more reliable than the others I've used (Symbolic copying, ImgPro and FileZilla).
b37509886e