RP2040 vga terminal

[Pierre Gaston]

I have the "enhance bus" version of the  RP2040 VGA Terminal, but is there any difference between the standard and the "enhance"  version besides the extra header row and the associated functionalities?

Can I just plug it in a standard bus?

Pierre

[Spencer Owen]

Hi Pierre,

No, there's no difference between the Standard Bus RP2040 VGA Temrinal and the Enhanced Bus RP2040 VGA Terminal other than the connector.

You can use just the long row of pins in a Standard Bus socket if you set the jumpers to TX1/RX1.

Alternatively, you can use the short row of pins in a Standard Bus socket (be careful to align them up) if you set the jumpers to TX2/RX2.

Hope that helps

Spencer 

--
You received this message because you are subscribed to the Google Groups "RC2014-Z80" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rc2014-z80+...@googlegroups.com.
To view this discussion, visit https://groups.google.com/d/msgid/rc2014-z80/9034fb54-b872-4705-8171-355128ed69f3n%40googlegroups.com.

[Pierre Gaston]

great thanks!

To view this discussion, visit https://groups.google.com/d/msgid/rc2014-z80/CAO93PtcmR1om_VGCFCudE9264Loxn1GS%3DuguU9V15eWGPnn7ig%40mail.gmail.com.