RC2014 Zed, ROM Firmware is RomWBW HBIOS v3.4.0, 2023-12-31, CF Card is BIOS v3.5.1-rc.4 [WBW]
David Hall
RomWBW HBIOS v3.4.0, 2023-12-31
RCBus [RCZ80_std] Z80 @ 7.372MHz
0 MEM W/S, 1 I/O W/S, INT MODE 1, Z2 MMU
512KB ROM, 512KB RAM
ROM VERIFY: 00 00 00 00 PASS
CTC: IO=0x88 NOT PRESENT
SIO0: IO=0x80 SIO MODE=115200,8,N,1
SIO1: IO=0x82 SIO MODE=115200,8,N,1
DSRTC: MODE=STD IO=0xC0 Fri 2025-09-05 17:08:21 CHARGE=OFF
MD: UNITS=2 ROMDISK=384KB RAMDISK=352KB
FD: MODE=RCWDC IO=0x50 NOT PRESENT
IDE: IO=0x10 MODE=RC
IDE0: ATA 8-BIT LBA BLOCKS=0x0003D400 SIZE=122MB
IDE1: NO MEDIA
PPIDE: IO=0x20 PPI NOT PRESENT
CH0: IO=0x3E TYPE=CH375 VER=0x37
CHUSB0: BLOCKS=0x0728FFFF SIZE=58655MB
CH1: IO=0x3C NOT PRESENT
FP: IO=0x00 NOT PRESENT
Unit Device Type Capacity/Mode
---------- ---------- ---------------- --------------------
Char 0 SIO0: RS-232 115200,8,N,1
Char 1 SIO1: RS-232 115200,8,N,1
Disk 0 MD0: RAM Disk 352KB,LBA
Disk 1 MD1: ROM Disk 384KB,LBA
Disk 2 IDE0: Hard Disk 122MB,LBA
Disk 3 IDE1: Hard Disk --
Disk 4 CHUSB0: USB Drive 58655MB,LBA
When I try to execute the hard disk 2, which is the CF Card
RCBus [RCZ80_std] Boot Loader
Boot [H=Help]: 2
Booting Disk Unit 2, Slice 0, Sector 0x00000000...
Volume "CP/M 2.2" [0xD000-0xFE00, entry @ 0xE600]...
CBIOS v3.5.1-rc.4 [WBW]
*** WARNING: HBIOS/CBIOS Version Mismatch ***
Configuring Drives...
A:=IDE0:0
B:=MD0:0
C:=MD1:0
D:=IDE0:1
E:=IDE0:2
F:=IDE0:3
G:=CHUSB0:0
H:=CHUSB0:1
I:=CHUSB0:2
J:=CHUSB0:3
1853 Disk Buffer Bytes Free
CP/M-80 v2.2, 54.0K TPA
Bdos Err On A: Select
I tried downloading updated ROM and using the Flash command, but I guess this doesnt work on the RC2014 Zed
What do I need to do to correct this or does the Zed Compact Flash not work with the Zed Rom?
