FS - New Independent Fabrications steel road fork with fender eyelets

[Gary]

Hi All,

Here's a good replacement fork for that carbon one on your road-ish bike. It's a new IF steel fork that will accept a rolly polly tire (just barely with about 1/8in clearance - see pics). It's got fork eyelets, an uncut 262mm steerer and a 45 degree rake.

It came as a second fork with a Seven frame I bought second hand for my wife. Apparently Seven spec - ed it out and IF built it for the frame's original owner. It's never been mounted and is as new.

I'm thinking $150 shipped in the CONUS.

Pics here:

http://www.flickr.com/photos/75063912@N08/sets/72157631615447007/

Thanks,

gary

[William]

You should mention to your prospective customers what the steertube type and diameter is.  Also, I imagine it is 45mm of rake, not 45 degrees of rake.  Best of luck! 

[Gary]

Thanks to William for pointing out my omissions and goofs in my post!

The fork's steer tube is for a 1 1/8" headtube and it's got 45mm rake, not 45 degrees. That's what I get for rushing...

gary