Clem L front derailleur

110 views
Skip to first unread message

Keith Swanson

unread,
Nov 5, 2019, 12:50:55 AM11/5/19
to RBW Owners Bunch
I sold my Hillborne frame to switch to a Clem L and discovered that the front derailleur clamp is too small.  I have a 3x8 set up with a Deore rear derailleur.  What size clamp is needed for the front derailleur and does anyone have a suggestion of which I should get?  

Joe Bernard

unread,
Nov 5, 2019, 1:20:28 AM11/5/19
to RBW Owners Bunch
It's 31.8 on my recent-model 45cm L, but the first ones came with bigger tubes and I believe the 59cm still does. Which means maybe this will help, it's a Deore triple front I have kicking around here with a nifty removable 31.8 shim..you can use it as the bigger size if you need it. I'll kick it over to you for free, someone just sent me a thing that they refused shipping for so I'll pay it forward.

Joe Bernard
Novato CA.
20191104_221435.jpg
20191104_221442.jpg

Keith Swanson

unread,
Nov 5, 2019, 9:17:33 AM11/5/19
to rbw-owne...@googlegroups.com
Thanks for the offer Joe, but I managed to figure it out and ended up with a new XTR that the guy at the shop gave me a deal on because it had been sitting around for so long.

Best,
Keith

Sent from my iPhone

> On Nov 4, 2019, at 10:20 PM, Joe Bernard <joer...@gmail.com> wrote:
>
> It's 31.8 on my recent-model 45cm L, but the first ones came with bigger tubes and I believe the 59cm still does. Which means maybe this will help, it's a Deore triple front I have kicking around here with a nifty removable 31.8 shim..you can use it as the bigger size if you need it. I'll kick it over to you for free, someone just sent me a thing that they refused shipping for so I'll pay it forward.
> --
> You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bun...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/17ceed68-1771-452b-8049-4757089c8561%40googlegroups.com.
> <20191104_221435.jpg>
> <20191104_221442.jpg>

David Carner

unread,
Nov 5, 2019, 9:20:18 AM11/5/19
to RBW Owners Bunch
You did not mention the size of your Clem L and as Joe mentioned the tube size may vary by bike size. My August, 2019 Clem L 52 also requires a 31.8.  I was interested to note that the seat tube is tapered, 31.8 at the bottom, approximately 28.6 at the top.
David

j.schwartz

unread,
Nov 5, 2019, 9:38:09 AM11/5/19
to RBW Owners Bunch
Can someone who knows tell us the FD clamp size is for the new 59cm Clem-L?

Joe Bernard

unread,
Nov 5, 2019, 9:59:55 AM11/5/19
to RBW Owners Bunch
Good on ya, Keith, I'm glad it's solved.

J Imler

unread,
Nov 8, 2019, 12:13:40 PM11/8/19
to RBW Owners Bunch
31.8.
Reply all
Reply to author
Forward
0 new messages