FS: Silver 1 crank arms with or without rings

[Bill Lindsay]

I've got an extra set of Silver1 cranks, set up as a Wide/Low double with guard.  They are 173mm arms.  Mine may be special because it may be the heaviest set up possible.  The 38T Ring is a Rivendell Silver in STEEL.  That ring came on my HubbuHubbuH tandem as a timing ring.  It's a porker but it may also outlive all of us.  The 24 ring is a steel Sugino.  The guard I made in my shop out of a 42T Race Face narrow/wide chainring.  So it's unique but totally rider-worthy.  I had this crankset most recently on my RoadUno, with a front derailleur and a single freewheel.  The front shifting was perfecto, so there's nothing about this Silver Timing ring that makes it unsuitable for any of your derailleur setups.  

The Rivendell Silver1 38/24 with guard retails for $280, and everything secondhand should be half retail, so I'm asking $140 plus shipping.  Local pickup is free!  

I'm also throwing in a nearly new UN-300 sealed bottom bracket.  It's 110mm and that's what I was running on my RoadUno.  

If you don't want the rings, then the arms with crank bolts (but no chainring bolts) at half-retail is $95 plus shipping.  You can still have the free UN300 BB if you want it.

Front side photo

Back Side Photo

Bill Lindsay

El Cerrito, CA

[Joe Putnam]

Tempting/messaged!

[Bill Lindsay]

No money has changed hands but I've got a local buyer for the crank arms -OR- the full crankset, and a willing buyer to scoop up the rings if they happen to remain available, so I'm going to call this for-sale offering SOLD.

BL in EC

On Thursday, May 21, 2026 at 9:49:55 AM UTC-7 Bill Lindsay wrote: