TA / VO 50.4 crank on Atlantis

[Gino Zahnd]

Has anyone put a TA or Velo Orange 50.4 BCD double crank on a 700c Atlantis? If so, what's the required bottom bracket width?

Thanks,

Gino

[Mike]

I imagine you'd use a 118mm or maybe a little wider? 

More importantly, did someone score an Atlantis? To quote David E., "Someone's cup runneth over with sweet bikes."

--mike

[PATRICK MOORE]

I used a Pro 5 Vis on an old Diamond Back mtb that had clearance for
60s plus fenders. It required a 140 mm bb. I actually had Phil make me
a 145, but discovered it was a wee bit longer than necessary. (I later
sold the 145.)

I'd be curious what you find necessary for your Atlantis.

> --
> You received this message because you are subscribed to the Google Groups
> "RBW Owners Bunch" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/rbw-owners-bunch/-/UkDpAxK4BqoJ.
> To post to this group, send email to rbw-owne...@googlegroups.com.
> To unsubscribe from this group, send email to
> rbw-owners-bun...@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/rbw-owners-bunch?hl=en.



--
"Push back against the age as hard as it pushes against you."

Flannery O'Connor

-------------------------
Patrick Moore, Albuquerque, NM, USA
For professional resumes, contact Patrick Moore, ACRW
http://resumespecialties.com/index.html
-------------------------

[Marty]

Well, it is an Atlantis, and it is a TA Cyclotourist...

http://www.flickr.com/photos/guuwatanabe/6291484838/in/set-72157627476480046/

The closest I got to doing what you suggest was using a Sugino PX on an old Trek TX500:

http://www.flickr.com/photos/32306142@N07/4669102576/

As I recall, I used a 116, but keep in mind I only used two rings.

Marty