FS: Various things , small parts, couple old stems, vtg 600 mini group

[J Schwartz]

Hello, 

Still thinning my collection of things and putting up some various small pieces that may be of interest to some of you.

I'm not posting photos for every item on this one but can send a couple if you email asking. Prices don't include shipping from New York State

Thank you

·      Paul Comp - Thumbie mounts - Pair - For Shimano - 31.8 clamp size 

·      practically new, only used for about a month.  There is a very small scratch in the black paint on the underside of the mount where you'll never see it once it's mounted

·      $75

·      Paul Comp - Stem Cap Light Mount – Black

·      Never used but has been sitting in a parts box for a couple years...so minimal shop wear

·      $25

·      White Industries - VBC Chainring Bolts with the wedges - actual pic

·      New, never used - 5 bolts and 5 wedges plus 1 extra bolt

·      $20

·      White Industries – Crank Lockring – Silver

·      Purchased for a VBC/Eno crank, 3-notch, to be used with THIS W.I. lockring tool

·      $15

·      Bruce Gordon - QS2 - Quick Switch System

·      To swap two cockpits on one bike

·      with instructions (requires 2 full sets of bars, stem, shifters, levers, tape, housing, cable, etc...Only for shift cables ...and probably intended for Canti brakes where you can just un-straddle the hanger ...not sure how it would platy with V-brakes - barrels and connecting locks for front derailleur, rear derailleur ,front shifter 1, rear shifter 1, front shifter 2, rear shifter 2

·      new unused

·      $30

·      Bruce Gordon - Stainless strapless Clips

·      Sizes: Mens U.S. 10 and under

·      Lightly used ...minimal scuffing on front of cages...could easily be sanded/buffed

·      $45

·      Velo Orange – Massload Porteur Double Kickstand

·      Unused

·      $20

·      Shimano XT – SPD Pedals – “XT PD-M785”

·      some typical scuffing on outer cages but actually very very low miles on the pedals

·      $45

·      MKS 3000R traditional rubber pedal

·      Unused, some slight shopwear…purchased for my old Bleriot and never used them.  Very handsome, brass nuts, and heavy, great for a city bike

·      $25

·      Tektro Long Pull Drop Bar Levers – “RL 520”

·      For V-Brakes , Silver Color

·      Practically New 

·      $25

·      Nitto Technomic 5cm, 26.0 Stem

·      150mm above max insertion line

·      Used condition, finish is worn

·      $25

·      Nitto quill Stem, Unsure of model.  Says 5354 on stem.

·      ≈95mm length & ≈ 95mm insertion above max line

·      I believe it might be a “young 3” stem with a 72º rise

·      Well used with markings 

·      $15

·      Shimano 600ex “arabesque” mini group, early ‘80’s

·      These came on my first steel roadish bike, a Ross Aristocrat.  That bike was great!

·      Calipers – nutted, Levers w/ blue diacompe hoods, dt shifters on clamp, rear derailleur (short cage), front derailleur 

·      $100

 

 

[J Schwartz]

Price Drops and adjustments : shipping included to lower 48

·      Paul Comp - Thumbie mounts - Pair - For Shimano - 31.8 clamp size 

·      practically new, only used for about a month.  There is a very small scratch in the black paint on the underside of the mount where you'll never see it once it's mounted

·      $65 shipped

  Paul Comp - Stem Cap Light Mount – Black

·      Never used but has been sitting in a parts box for a couple years...so minimal shop wear

·      $25 shipped

 

·     Origin8 Garry ii Handlebars - Black ·     AL6061-T6 construction,  530mm drop width / 360mm top width,25º flared drops, Accepts bar-end shifters

          slight scratches on front near logos  see pics

·      $35 shipped

 

·      White Industries - VBC Chainring Bolts with the wedges - actual pic

·      New, never used - 5 bolts and 5 wedges plus 1 extra bolt

·      $25 shipped

 

·      White Industries – Crank Lockring – Silver

·      Purchased for a VBC/Eno crank, 3-notch, to be used with THIS W.I. lockring tool

·      $10 shipped

 

·      Bruce Gordon - QS2 - Quick Switch System

·      To swap two cockpits on one bike

·      with instructions (requires 2 full sets of bars, stem, shifters, levers, tape, housing, cable, etc...Only for shift cables ...and probably intended for Canti brakes where you can just un-straddle the hanger ...not sure how it would platy with V-brakes - barrels and connecting locks for front derailleur, rear derailleur ,front shifter 1, rear shifter 1, front shifter 2, rear shifter 2

·      new unused

·      $30 shipped

 

·      Bruce Gordon - Stainless strapless Clips

·      Sizes: Mens U.S. 10 and under

·      Lightly used ...minimal scuffing on front of cages...could easily be sanded/buffed

·      $40 shipped

 

·      Velo Orange – Massload Porteur Double Kickstand

·      Unused

·      $25 shipped

 

·      Shimano XT – SPD Pedals – “XT PD-M785”

·      some typical scuffing on outer cages but actually very very low miles on the pedals

·      $40 shipped 

 

·      MKS 3000R traditional rubber pedal

·      Unused, some slight shopwear…purchased for my old Bleriot and never used them.  Very handsome, brass nuts, and heavy, great for a city bike

·      $30 shipped

 

·      Nitto quill Stem, Unsure of model.  Says 5354 on stem.

·      ≈95mm length & ≈ 95mm insertion above max line

·      I believe it might be a “young 3” stem with a 72º rise

·      Well used with markings 

·      $20 shipped

·      Shimano 600ex “arabesque” mini group, early ‘80’s

·      These came on my first steel roadish bike, a Ross Aristocrat.  That bike was great!

·      Calipers – nutted, Levers w/ blue diacompe hoods, dt shifters on clamp, rear derailleur (short cage), front derailleur 

·      $75 shipped