FS: Crust Malocchio XL pre-production (fits 42s front & rear) F/F/HS +parts

[exliontamer]

This is the pre-production model with softer graphics & the properly placed brake bridge so it fits true 42s front & rear. I was running 38s with a lot of room & my guess is you could fender 38s on it. Very lightweight Columbus Spirit steel. Comes with a Campagnolo Record headset installed. There's a small ding in the top tube, a small paint chip on point of the seat post lug, & very slight paint flecking on the back of the seat tube. 

Comes with the following parts to start a build:

*46cm Noodles (some bar tape schmutz)

*8cm Nitto Technomic stem (some hazing)

*Tektro R559 Brakes (perfect)

*Shimano Tiagra Levers (some light allen key business on the gray plastic)

*Silver DT shifters (perfect)

$1200 shipped in the continental US

Obviously happy to answer any question, send detailed pics, talk about the frame, etc. Thanks!

[exliontamer]

[exliontamer]

Bump & drop. $1,100 shipped

Pics of the other side & the light paint flecks on the seat tube.

[exliontamer]

Also, wanted to clarify that the measurements are the same as the production frame. The seat tube is 61cm ctc & just shy of 63cm ctt. The top tube is 60cm ctc.

[exliontamer]

Bump, price drop, pics, & more (very slight dents). I noticed some slight buckling where the front derailleur was clamped. Nothing major but always want to be transparent. If you zoom in on the photo you can see it just below the water cage bolts. 

$1000 SHIPPED W/ PARTS. Frame/Fork/Headset weight: 6.3 lbs

[exliontamer]

Also check out this box that's ready to ship this bike. 

[exliontamer]

Bumping again with a change. $900 shipped for the frame/fork/headset or trade for an XL Canti Lightning Bolt