FS: 65cm Waterford RS-22 Frame/Fork(s)/Headset

15 views

Skip to first unread message

exliontamer

unread,

2:48 PM (2 hours ago) 2:48 PM

to RBW Owners Bunch

65cm ctt with a 57cm tt. The frame was built with a combination of Reynolds 853 & True Temper OX PLAT. Very lightweight for its size. New IRD TechnoGlide headset. The steel fork is a recent custom order from Ellis Cycles. The matching carbon fork is a True Temper Alpha Q. The carbon fork has a bit of paint removed from under the fork where the tire hits. Both forks are cut to allow a nice amount of bar height. The photo shows the clearance at the rear (the front fork has plenty more room). The tire is a 700x33 & has 4mm of clearance. There are a few very light paint scuffs on the top tube and some scuffs on the top rear of the seat stays but nothing noticeable with a complete build. The saddle height in the photo is 81cm for reference. I'm a long legged 6'1" (91cm pbh).

$900 shipped to the lower 48

Notes/possible points of interest...

* The carbon fork only clears a 28 and needs a short reach caliper. The bike was built for short reach but the rear brake bridge was put in a nice spot and allows the use of mid reach calipers for more tire clearance with 700c wheels. It will also likely need a compatible IRD crown race.

* The steel fork is built for mid reach calipers. The heart stickers are my touch and easily removable if that's not your thing.

* I had this setup as a 650b at one point and it easily took 650x42s.

Thanks! Happy to answer any questions!

https://drive.google.com/drive/folders/1QgE39lTzWNkUvWqBeJU6TM82t67flS_v?usp=sharing

Reply all

Reply to author

Forward

0 new messages