Seismograph Download [VERIFIED]
Kirsten Looby
The foundation of a seismic station is critical.[2] A professional station is sometimes mounted on bedrock. The best mountings may be in deep boreholes, which avoid thermal effects, ground noise and tilting from weather and tides. Other instruments are often mounted in insulated enclosures on small buried piers of unreinforced concrete. Reinforcing rods and aggregates would distort the pier as the temperature changes. A site is always surveyed for ground noise with a temporary installation before pouring the pier and laying conduit. Originally, European seismographs were placed in a particular area after a destructive earthquake. Today, they are spread to provide appropriate coverage (in the case of weak-motion seismology) or concentrated in high-risk regions (strong-motion seismology).[3]
The concept of measuring the "shaking" of something means that the word "seismograph" might be used in a more general sense. For example, a monitoring station that tracks changes in electromagnetic noise affecting amateur radio waves presents an rf seismograph.[7] And helioseismology studies the "quakes" on the Sun.[8]
By the 13th century, seismographic devices existed in the Maragheh observatory (founded 1259) in Persia, though it is unclear whether these were constructed independently or based on the first seismoscope.[13] French physicist and priest Jean de Hautefeuille described a seismoscope in 1703,[10] which used a bowl filled with mercury which would spill into one of eight receivers equally spaced around the bowl, though there is no evidence that he actually constructed the device.[14] A mercury seismoscope was constructed in 1784 or 1785 by Atanasio Cavalli,[15] a copy of which can be found at the University Library in Bologna, and a further mercury seismoscope was constructed by Niccolò Cacciatore in 1818.[14] James Lind also built a seismological tool of unknown design or efficacy (known as an earthquake machine) in the late 1790s.[16]
The first seismographs were invented in the 1870s and 1880s. The first seismograph was produced by Filippo Cecchi in around 1875. A seismoscope would trigger the device to begin recording, and then a recording surface would produce a graphical illustration of the tremors automatically (a seismogram). However, the instrument was not sensitive enough, and the first seismogram produced by the instrument was in 1887, by which time John Milne had already demonstrated his design in Japan.[19]
In 1880, the first horizontal pendulum seismometer was developed by the team of John Milne, James Alfred Ewing and Thomas Gray, who worked as foreign-government advisors in Japan, from 1880 to 1895.[3] Milne, Ewing and Gray, all having been hired by the Meiji Government in the previous five years to assist Japan's modernization efforts, founded the Seismological Society of Japan in response to an Earthquake that took place on February 22, 1880, at Yokohama. Two instruments were constructed by Ewing over the next year, one being a common-pendulum seismometer and the other being the first seismometer using a damped horizontal pendulum. The innovative recording system allowed for a continuous record, the first to do so. The first seismogram was recorded on 3 November 1880 on both of Ewing's instruments.[19] Modern seismometers would eventually descend from these designs. Milne has been referred to as the 'Father of modern seismology'[20] and his seismograph design has been called the first modern seismometer.[21]
Later, professional suites of instruments for the worldwide standard seismographic network had one set of instruments tuned to oscillate at fifteen seconds, and the other at ninety seconds, each set measuring in three directions. Amateurs or observatories with limited means tuned their smaller, less sensitive instruments to ten seconds.The basic damped horizontal pendulum seismometer swings like the gate of a fence. A heavy weight is mounted on the point of a long (from 10 cm to several meters) triangle, hinged at its vertical edge. As the ground moves, the weight stays unmoving, swinging the "gate" on the hinge.
The advantage of a horizontal pendulum is that it achieves very low frequencies of oscillation in a compact instrument. The "gate" is slightly tilted, so the weight tends to slowly return to a central position. The pendulum is adjusted (before the damping is installed) to oscillate once per three seconds, or once per thirty seconds. The general-purpose instruments of small stations or amateurs usually oscillate once per ten seconds. A pan of oil is placed under the arm, and a small sheet of metal mounted on the underside of the arm drags in the oil to damp oscillations. The level of oil, position on the arm, and angle and size of sheet is adjusted until the damping is "critical", that is, almost having oscillation. The hinge is very low friction, often torsion wires, so the only friction is the internal friction of the wire. Small seismographs with low proof masses are placed in a vacuum to reduce disturbances from air currents.
Modern sensitivities come in three broad ranges: geophones, 50 to 750 V/m; local geologic seismographs, about 1,500 V/m; and teleseismographs, used for world survey, about 20,000 V/m. Instruments come in three main varieties: short period, long period and broadband. The short and long period measure velocity and are very sensitive, however they 'clip' the signal or go off-scale for ground motion that is strong enough to be felt by people. A 24-bit analog-to-digital conversion channel is commonplace. Practical devices are linear to roughly one part per million.
Delivered seismometers come with two styles of output: analog and digital. Analog seismographs require analog recording equipment, possibly including an analog-to-digital converter. The output of a digital seismograph can be simply input to a computer. It presents the data in a standard digital format (often "SE2" over Ethernet).
The modern broadband seismograph can record a very broad range of frequencies. It consists of a small "proof mass", confined by electrical forces, driven by sophisticated electronics. As the earth moves, the electronics attempt to hold the mass steady through a feedback circuit. The amount of force necessary to achieve this is then recorded.
One of the continuing problems with sensitive vertical seismographs is the buoyancy of their masses. The uneven changes in pressure caused by wind blowing on an open window can easily change the density of the air in a room enough to cause a vertical seismograph to show spurious signals. Therefore, most professional seismographs are sealed in rigid gas-tight enclosures. For example, this is why a common Streckeisen model has a thick glass base that must be glued to its pier without bubbles in the glue.
It might seem logical to make the heavy magnet serve as a mass, but that subjects the seismograph to errors when the Earth's magnetic field moves. This is also why seismograph's moving parts are constructed from a material that interacts minimally with magnetic fields. A seismograph is also sensitive to changes in temperature so many instruments are constructed from low expansion materials such as nonmagnetic invar.
Another issue is that the transfer function of a seismograph must be accurately characterized, so that its frequency response is known. This is often the crucial difference between professional and amateur instruments. Most are characterized on a variable frequency shaking table.
Accelerographs and geophones are often heavy cylindrical magnets with a spring-mounted coil inside. As the case moves, the coil tends to stay stationary, so the magnetic field cuts the wires, inducing current in the output wires. They receive frequencies from several hundred hertz down to 1 Hz. Some have electronic damping, a low-budget way to get some of the performance of the closed-loop wide-band geologic seismographs.
A worldwide array of seismometers can actually image the interior of the Earth in wave-speed and transmissivity. This type of system uses events such as earthquakes, impact events or nuclear explosions as wave sources. The first efforts at this method used manual data reduction from paper seismograph charts. Modern digital seismograph records are better adapted to direct computer use. With inexpensive seismometer designs and internet access, amateurs and small institutions have even formed a "public seismograph network".[24]
Seismographs are instruments used to record the motion of the ground during an earthquake. They are installed in the ground throughout the world and operated as part of a seismographic network. The earliest "seismoscope" was invented by the Chinese philosopher Chang Heng in A.D. 132. This did not, however, record earthquakes; it only indicated that an earthquake was occurring. The first seismograph was developed in 1890.
A seismograph is securely mounted onto the surface of the earth so that when the earth shakes, the entire unit shakes with it EXCEPT for the mass on the spring, which has inertia and remains in the same place. As the seismograph shakes under the mass, the recording device on the mass records the relative motion between itself and the rest of the instrument, thus recording the ground motion. In reality, these mechanisms are no longer manual, but instead work by measuring electronic changes produced by the motion of the ground with respect to the mass.
Earthquakes are recorded by a seismographic network. Each seismic station in the network measures the movement of the ground at that site. The slip of one block of rock over another in an earthquake releases energy that makes the ground vibrate. That vibration pushes the adjoining piece of ground and causes it to vibrate, and thus the energy travels out from the earthquake hypocenter in a wave...
356178063d