FLARM Fusion Not Broadcasting Wifi Network (SSID)?

[Erik Mann]

I'm working on a friend's glider and cannot get connected wirelessly with the FlarmHub app and Wifi to the FLARMFusion.   I know the SSID I'm looking for and it is not showing.  I also know it hasn't been changed from the factory settings.   I've tried with an Android phone and a Window's laptop, and no dice.   The device is powered on in my shop (so no GPS signal) and it is showing one green light for power.   I can communicate on the USB port and the recent log files show that it is otherwise working.     Firmware is version 7.40 which is the first version that doesn't require the annual update.   

Anyone dealt with this before?

P3

[Paul Remde]

Hi,

This is a new problem.  I had the same issue recently.  I asked FLARM what to use for the SSID and they said to use the connect manually in my phone's Wi-Fi connection screen, and to use the entire model number and serial number combination - like "FLAFLX10W-001149" as the SSID.

Best Regards,

Paul Remde

Cumulus Soaring, Inc.  

[Moshe Braner]

But, whatever the SSID is, shouldn't it show up in the list of available networks, as shown on the phone or laptop?

[Erik Mann]

Thanks Paul,  

Did that and nothing.    Tried the hard reset with the pin pushing the button and also nothing.    

--
Thanks for using RAS_Prime!
---
You received this message because you are subscribed to a topic in the Google Groups "RAS_Prime" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/rasprime/t6G9Z77cF08/unsubscribe.
To unsubscribe from this group and all its topics, send an email to rasprime+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rasprime/8e175010-121f-42a1-a89a-44d23773b3f0n%40googlegroups.com.

[Erik Mann]

It "should" but it doesn't.  So I tried to manually "add network" in case it's not broadcasting its ID,  but that also isn't working.  I'm stymied. 

--

Thanks for using RAS_Prime!
---
You received this message because you are subscribed to a topic in the Google Groups "RAS_Prime" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/rasprime/t6G9Z77cF08/unsubscribe.
To unsubscribe from this group and all its topics, send an email to rasprime+u...@googlegroups.com.

To view this discussion visit https://groups.google.com/d/msgid/rasprime/094ba1ba-89ee-4548-80ac-d47577463b1dn%40googlegroups.com.

[Paul Remde]

Hi Erik,

 

Try using the FlarmHub app, click the “+ Add” button, then select the “Connect manually” button.

 

Best Regards,

 

Paul Remde
Cumulus Soaring, Inc.

8661 Connelly Place

Savage, MN 55378

USA

Serving the soaring community
1-952-445-9033

Website: https://www.cumulus-soaring.com/

Patreon: https://www.patreon.com/cumulussoaring (Soaring Product Training videos)

Soaring News: https://www.facebook.com/CumulusSoaring

To view this discussion visit https://groups.google.com/d/msgid/rasprime/CABcS4jkNmO%3DUk7%2Brvs_4KXRPG_9pU12AX9_t_QHThvmXF%3DwAeQ%40mail.gmail.com.

[Erik Mann]

Thanks Paul - tried that as well.    The App also doesn't "see" the Flarm and I get the error message "connection unsuccessful" trying to manually add the network via FLARM.   On the plus side,  I did connect to the Samsung Refrigerator in the shop :-)