Native openwrt trunk for raspberry pi

[Osku]

Hi.

At this site is a patch for openwrt so one can use rpi kernel..

It makes brcm2708 target use latest table kernel while writing: 3.12.2

and patches it to kernel available at https://github.com/raspberrypi/linux/tree/rpi-3.12.y

No more mmc0 final write errors or other problems on raspberry pi..

Oh, the patch. You can find it from: https://sites.google.com/site/variousopenwrt/rpi-patch

[Xue Liu]

Hello Osku,

Thank you for your patch. Now my raspberry pi is working well with latest Barrier Breaker and Linux 3.12.2. The kernel also  recognize my RT5370 wifi dongle. 

Now I want to connect my EasyBox 803A. I have tried several tutorials from Internet but no success. Do you have any idea about how to config a wifi dongle to connect a router ?

Regards,

Xue Liu    

2013/12/1 Osku <oskari...@gmail.com>

--
You received this message because you are subscribed to the Google Groups "Raspberry Pi Openwrt Development" group.
To unsubscribe from this group and stop receiving emails from it, send an email to raspberrypi-openw...@googlegroups.com.
To post to this group, send email to raspberrypi...@googlegroups.com.
Visit this group at http://groups.google.com/group/raspberrypi-openwrt-dev.
For more options, visit https://groups.google.com/groups/opt_out.

--

[Osku]

I haven't got any wifi dongle to work as AP properly with Raspberry Pi and I have tried several, most propable reason for this is USB power. With one dongle I got my SSID to display and almost was able to join and then it was gone again.

I do not know which facilities RT5370 uses and for your unfortunate, I am quite busy, so not going to find out, but there are several, hostapd, then there was that "mode" for hostapd which needed a wrapper script.. so on..

Do it like you normally do it on OpenWRT and read the docs at openwrt.org. If you don't know available options and want to make this easier, install luci- I find that almost always fastest and easiest way to fiddle around things like this that I cannot remember..

perjantai, 6. joulukuuta 2013 0.40.48 UTC+2 ClockworkBird kirjoitti:

Hello Osku,

Thank you for your patch. Now my raspberry pi is working well with latest Barrier Breaker and Linux 3.12.2. The kernel also  recognize my RT5370 wifi dongle. 

Now I want to connect my EasyBox 803A. I have tried several tutorials from Internet but no success. Do you have any idea about how to config a wifi dongle to connect a router ?

Regards,

Xue Liu    

2013/12/1 Osku <oskari...@gmail.com>

Hi.

At this site is a patch for openwrt so one can use rpi kernel..

It makes brcm2708 target use latest table kernel while writing: 3.12.2

and patches it to kernel available at https://github.com/raspberrypi/linux/tree/rpi-3.12.y

No more mmc0 final write errors or other problems on raspberry pi..

Oh, the patch. You can find it from: https://sites.google.com/site/variousopenwrt/rpi-patch

--
You received this message because you are subscribed to the Google Groups "Raspberry Pi Openwrt Development" group.

To unsubscribe from this group and stop receiving emails from it, send an email to raspberrypi-openwrt-dev+unsub...@googlegroups.com.

To post to this group, send email to raspberrypi...@googlegroups.com.
Visit this group at http://groups.google.com/group/raspberrypi-openwrt-dev.
For more options, visit https://groups.google.com/groups/opt_out.

--