Packages.load Error

[Valorie Carlee]

Igot this error amongst numerous others setting up a new virtual box LMDE5 on my new windows 11 pro computer. I haven't used windows in about 12 years, and the changes were crazy causing countless errors on Windows and LMDE5 Vbox.My last issue was this in vs code.

I have been receiving error msg installing packages. Everytime I run a code it says "Updating Loaded Packages - One or more of the packages that will be updated by installation are currently loaded. Restarting R prior to updating these packages is strongly recommended" and if I click "yes" to it, it goes into a loop. If I decide to skip that code chunk and try run the next code, it gives me error msg saying that it "cound not find function.."

You're likely getting this error because you can't attach a library that you haven't installed. The functions are inside of the library, so you'll need to make sure the install succeeds. Try installing the packages in a fresh session.

I find that restarting R from this dialog box does not always do the trick. I recommend hitting "Cancel" and then using the keyboard shortcut Ctrl + Shift + F10 to restart your R session. Then retry installing the package.

Right, so you'll have a clean session. You might also want to close out of your .Rmd if you're installing knitr. This could be just a coincidence from one time I was having problems, but I can't imagine it hurts to do.

Some RStudio IDE feature and UX are build upon some R . It is why you need them, and they can be loaded just because the IDE is open. I observed this with yaml once, that is use to load the list of Rmd templates available in one of the menu.

It may be the case for knitr: This is the foundation for Rmd functionnality and it is possible the Rmd feature in the IDE are built upon knitr being loaded. Not sure but possible.

In all case, one safest way to update all your packages could also be to not open RStudio for that. You open R GUI or just R at command line and run update.packages() there - nothing is loaded and no risk a conflict.

I successfully installed packages mentioned previously (except 'knitr') and the code runs without any problem but when I click command for 'knit HTML' , I get this error -

Picture41368770 189 KB

I checked the file location .libPaths(), plyr dplyr and memisc packages are now turn into .dll only. Do you think this is the problem? If so how can I fix it?

Thank you for your advise. I deleted those folders from the directory and install them again. Which went well but again, after running the 'knit HTML', I got the same message

and I can only see .dll file in the plyr, dplyr, memisc folder..

Two complaints here:

a) when I did this with a list, the error message failed to tell me which package(s) out of the list failed.

b) The error message is too vague, I wasn't sure what was wrong or how to fix it. It did occur to me to uninstall and reinstall, which I did.

A third problem that occurs, is when I tried to install 'rlang' (without first uninstalling it), I get a message that R needs to be restarted with a restart button. After I click on it, the install fails, then it says I need to restart R... etc.

I am using Julia on a Mac laptop. Everything worked fine until yesterday when I want to do some plots I can no longer import the Plots package. When I try to do Using Plots, I receive the following error message:

On a related note, it is not recommended to install all packages in the default environment. You should keep only development dependencies like IJulia, Revise etc. in the default environment and work in project specific environments with only those packages needed for a specific piece of work to minimise these kinds of version conflicts.

I'm trying to run a workflow which has been built using R in Alteryx Designer. Unfortunately, at the moment, I am getting an error code/series of error codes when I try to run it. Previously, my colleagues and I have not had such a problem running the workflow (i.e. it looks like it is a new issue).

I have been having some strange gcc compile messages while attempting to install AUR packages. Some searching here suggested trying to reinstall glibc (OK) and gcc. However, on reinstalling gcc I get these messages:

Philosophy is looking for a black cat in a dark room. Metaphysics is looking for a black cat in a dark room that isn't there. Religion is looking for a black cat in a dark room that isn't there and shouting "I found it!". Science is looking for a black cat in a dark room with a flashlight.

I am not accustomed to dealing with broken databases (fortunately ), so I may have been mistaken in thinking that --force will override the broken local database error. So try deleting the broken directory '/var/lib/pacman/local/gcc-6.2.1-1/' and then force-reinstalling the package (you will likely have at least some files from it, so if you don't force the package it will mistakenly error on all those orphaned gcc files).

The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.

Description: Package migration from version 3 to version 2 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".

Description: The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.

Error1Error loading 'PkgETL-SSIS-308_ETLName.dtsx' : The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails. .E:\FOLDER NAME\FOLDER NAME_DataSource\308_FOLDER NAME\308_FOLDER NAME\IntSer_308_ETLNAme_ETL\PkgETL-SSIS-308_ETLNAme.dtsx11

I'm in the same boat now. I'm getting this same error message these other folks are. I'm just trying to evaluate the CozyRoc SFTP control. I installed the 32-bit CozyRoc SFTP control, I created a new project, dropped the SFTP task on the control flow, created a new ssh connection that connects just fine, configured the task, and get the same error you guys are getting.

I'm running Windows 7 /64-bit OS. I have both SQL2K5 32-bit and SQL2K8 32-bit installed locally on my development box. I spend most of my time connected to other production/development servers. Either through SSMS, or Remote Desktop. But I like to develop my packages locally, then push them out to production.

My last question is does the CozyRoc control give me access to the detailed file transfer session information? I really need to log file transfer session info. You know, "connected", "transferring", "success", "disconnected", etc.

In my role, I'm using quite a few automated apps (inherited, legacy). to move a huge number of files daily over SFTP. I'm trying to get them all consolidate into SSIS tasks. I've been using WS_FTP. It's just not holding up. It's a decent end user tool, but it comes up very short under the pounding I'm giving it. I need a solution with tighter SQL Server integration. I really want to recommend the Company purchase the CozyRoc SFTP control, but I need to be very sure about it first, or I may jepordize my credibility.

Exception deserializing the package "The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.

What you need to do to isolate the problem is go to your SQL Server 2005 binn directory and rename your DTExec.exe to DTExec.exe_Backup. Try running same statement again if it works then you know what your problem is. Your problem is when you execute xp_cmdshell SQL automatically runs in SQL 2005 version instead of using DTExec.exe from SQL 2008 directory. If you don't have other BAT files running using DTExec.exe from 2005 then just leave it renamed and off you go. Otherwise you will have to make sure to convert all BAT file to start from SQL 2008 directories.

3a8082e126