What Are The Basics Of Electrical Engineering
Jan Dominquez
Electrical Engineering is concerned with all phases and development of the transmission and utilization of electric energy and intelligence. From communication systems to electronic components that run computers and motor vehicles, electrical engineers design products and systems that meet the needs of today and tomorrow's electrical and electronic systems.
While it is essential that electrical engineers understand the fundamentals of their chosen fields, they must also understand the role that other branches of engineering play in completed work. The curriculum provides a foundation in basic engineering as well as depth and breadth in electrical engineering and sufficient electives to allow specialization in academic areas including:
To be admitted, a student must have an overall 2.5 grade point average in critical-tracking courses, based on the first two attempts in eight professional courses and have earned a minimum grade of C in each course of Calculus 1, Calculus 2, Calculus 3, Physics with Calculus 1, Physics with Calculus 2, Differential Equations and General Chemistry. Only the first two attempts (including withdrawals and drops) in each course will be considered for admission to or retention in the department.
Courses marked below with a footnote1 must be completed with minimum grade of C. For a course to be used as a prerequisite for an EEE/EEL-prefixed course, a minimum grade of C is required in the prerequisite course. Any 3000/4000 level EEL/EEE-prefixed course not taken to satisfy the breadth or depth requirement can be applied as EE technical elective, excluding EEL 3834 (only counts for computer programming requirement) EEL 3003, and EEL 3872, which does not apply toward degree requirements.
An electrical engineering student whose cumulative, upper-division or department grade point average falls below 2.0 or whose preprofessional grades do not meet department admission requirements will be placed on academic probation and be required to prepare a probation contract with an ECE academic advisor. If a student is not making normal academic progress, they will be placed on academic probation.
The objectives of the Electrical Engineering program at the University of Florida are to prepare students to be good citizens engaged in ethical engineering for the betterment of society and enabling them, so that within a few years of graduation, they:
The baccalaureate program prepares students to embark upon professional careers in electrical and computer engineering or to begin graduate study. The department's educational objectives are consistent with the ABET general criteria for accrediting programs in engineering in the United States.
To remain on track, students must complete the appropriate critical-tracking courses, which appear in bold. These courses must be completed by the terms as listed above in the Critical Tracking criteria.
This semester plan represents an example progression through the major. Actual courses and course order may be different depending on the student's academic record and scheduling availability of courses. Prerequisites still apply.
Electrical Engineering emphasizes development of the transmission and utilization of electric energy and intelligence. Electrical engineers design products and systems that meet the needs of today and tomorrow's electrical and electronic systems. Students will be able to design communication systems; design the electronic components that run computers, motor vehicles, TVs, stereo systems, and robots for automated factories; design aircraft and spacecraft control systems; design utility and industrial power systems; and design biological and biomedical systems.
The Electrical Engineering BS Program is accredited by the Engineering Accreditation Commission of ABET, , under the General Criteria and the Program Criteria for Electrical, Computer, Communications, Telecommunication(s) and Similarly Named Engineering Programs.
We rely on electricity, but sometimes underestimate its capability of causing injury. Even household current (120 volts) can stop your heart. UW personnel need to be aware of the hazards electricity poses, such as shock, fire and explosion, and either eliminate or control those hazards.
Electrical shock happens when current passes through the body. Electricity travels through closed circuits, and people, sometimes tragically, can become part of the circuit. When a person receives a shock, electricity flows between parts of the body or through the body to a ground. This can happen if someone touches both wires of an energized circuit, touches one wire of the circuit while standing unprotected or touches a metal part that has become energized.
Electrocution refers to the injury or lethal dose of electrical energy. Electricity can also cause forceful muscle contraction or falls. The severity of injury depends on the amount of current flowing through the body, the current's path through the body, the length of time the body remains in the circuit and the current's frequency.
To prevent electrical hazards, always make sure equipment is properly grounded. Electrical grounding provides an alternate path for electricity to follow, rather than going through a person. Equipment with a grounding prong must be plugged into an extension cord with a ground; the grounding plug should not be removed from the equipment.
When servicing and maintenance tasks involve electricity and electrical equipment, you must prevent the unexpected startup of equipment. More information on lockout/tagout procedures is available on the Hazardous Energy Control page.
Part of an arc fault, a type of electrical explosion or discharge that results from a low-impedance connection through air to ground or another voltage phase in an electrical system; it is also called a flashover and is distinctly different from the arc blast.
A ground fault circuit interrupter (GFCI), also called ground fault interrupter (GFI) or residual current device (RCD) is a device that shuts off an electric power circuit when it detects that current is flowing along an unintended path, such as through water or a person
In electrical engineering, ground or earth is the reference point in an electrical circuit from which voltages are measured, a common return path for electric current, or a direct physical connection to the Earth
Christiani's newly designed textbook "Christiani - basics Electrical Engineering" for school education helps to convey the topics of electrical engineering in a comprehensible and vivid way.The principles of theoretical and practical training are interlinked: solid fundamentals with consistent practical relevance are the focus of knowledge transfer. The textbook works towards an optimal examination result right from the start!
Examination-related problems from theory and practice support this objective, as does the consistent use of the table book as an exam-relevant source of information. Numerous examples support the much-needed sense of scale.
Solid foundation for technical applicationsMany exam-related tasks from theory and practice to prepare for the examStructured overviews for quick entry of the essential contentsProject-oriented approach: From the initial request to the change request (check!)Strong integration of the table book. Important, since the table book is available as a source of information for checksImportant information with tasks for conducting a conversation during the audit (technical discussion)
You can access your digital content via the Christiani learning portal C-LEARNING. C-LEARNING is browser-based, so it can be accessed regardless of the device used and without installing an app. Trainers and teachers as well as their trainees and students can access the platform at the same time, which is state-of-the-art in terms of security and user-friendliness.
Electrical design is an essential component of the engineering world, encompassing the planning, creation, and detailing of electrical systems. Whether a simple circuit for a household device or a complex power grid for a city, electrical design is critical. In this blog post, we will examine the fundamental concepts of electrical design and highlight its importance.
Electrical engineering is an engineering discipline concerned with the study, design, and application of equipment, devices, and systems which use electricity, electronics, and electromagnetism. It emerged as an identifiable occupation in the latter half of the 19th century after the commercialization of the electric telegraph, the telephone, and electrical power generation, distribution, and use.
Electrical engineering is divided into a wide range of different fields, including computer engineering, systems engineering, power engineering, telecommunications, radio-frequency engineering, signal processing, instrumentation, photovoltaic cells, electronics, and optics and photonics. Many of these disciplines overlap with other engineering branches, spanning a huge number of specializations including hardware engineering, power electronics, electromagnetics and waves, microwave engineering, nanotechnology, electrochemistry, renewable energies, mechatronics/control, and electrical materials science.[a]
Electrical engineers typically hold a degree in electrical engineering, electronic or electrical and electronic engineering. Practicing engineers may have professional certification and be members of a professional body or an international standards organization. These include the International Electrotechnical Commission (IEC), the Institute of Electrical and Electronics Engineers (IEEE) and the Institution of Engineering and Technology (IET, formerly the IEE).
Electrical engineers work in a very wide range of industries and the skills required are likewise variable. These range from circuit theory to the management skills of a project manager. The tools and equipment that an individual engineer may need are similarly variable, ranging from a simple voltmeter to sophisticated design and manufacturing software.
c80f0f1006