Logic Pro On Mac Mini M2
Jahed Stetter
I successfully used a small 2mm Allen key to detach the logic board. You shouldn't use anything tightly fitting, since, from what I understand, it's a levering action: fixed point is at the bottom of the case while the two holes in the logic board move to the back (connectors side). You can even get away with a single key/screw driver, if you alternate carefully.
The Allen key is used to gain leverage to hold the logic board so you can ease it out. I prefer the proper tool Mac mini Logic Board Removal Tool that way its safer from slipping which could damage your logic board.
Review this guide Mac mini Late 2012 Logic Board Replacement jump down to Step 15 which shows what's needed using the tool. The guide will weals you through the needed screws and other connections which need to be dealt with before sliding out the logic board.
I have been inundated with ads and glowing reviews about this Hot Logic Mini for use in the truck. I do not currently have anything to cook or reheat with in the truck. I have never cared for microwaves but am not opposed to them but this product sounds like it would be nice if it really works as it says. I am not opposed to paying $40 to find out if it is any good or not (have spent more money on worse things) but just curious about anyone who has actually used one. Thanks.
Your TWIC is a tamper-resistant biometric card which acts as both your identification in secure areas, as well as an indicator of you having passed the necessary security clearance. TWIC cards are valid for five years. The issuance of TWIC cards is overseen by the Transportation Security Administration and the Department of Homeland Security.
It isn't really comparable to a microwave. It is much slower and can't do everything a microwave can do. On the other hand, what it does do, it does better. It is ideal for reheating previously cooked food. Sometimes, I'll order a large meal at a restaurant when I'm by a good one, and put half of it in a foil container of the proper size and stick that in the fridge. In fact, I've just done that very thing. There was a good steakhouse across the street from the truck stop for the night, so I took one of my containers with me and put half in it. The day after tomorrow, I'll be parking at my consignee , so that morning I'll stick the meal in the Hot Logic and it will be ready whenever I am. I microwave would ruin the meal.
I have been using a Hot Logic for awhile now. I am on Nutrisystem and it will cook a frozen meal perfect.I have even cooked raw hamburgers and potatoes, was done in 3 hours when I stopped to make my delivery......thinking of buying another one in case this one stops working
Did you know you can fill out one quick form here on TruckingTruth and apply to several companies at once for paid CDL training? Seriously! The application only takes one minute. You will speak with recruiters today. There is no obligation whatsoever. Learn more and apply here:
Are you building a computer for gaming? And you want it to not take up too much space on your desk? Then of course you need a well-thought-out, well-designed and good-looking MINI ATX-sized case. Preferably still one with three mounted ARGB fans, an airy front and top, dust filters, and the side panel was made into a tempered glass door. This is where Case Logic Concept Portos ARGB MINI comes to the rescue. A concrete competitor for gaming tasks, providing good airflow, component culture, their safety and low temperatures of installed components.
An airy front and top panel significantly facilitates air circulation. Two 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer.
The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market.
Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight.
A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm.
Deprecation Warning: The Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Trinket so that people can maintain some older projects, we no longer recommend it. Please check out the Trinket M0. It has built-in USB, more capabilities, and is comparable in price!
Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost arduino-IDE programmable board!
The Attiny85 is a fun processor because despite being so small, it has 8K of flash, and 5 I/O pins, including analog inputs and PWM 'analog' outputs. We designed a USB bootloader so you can plug it into any computer and reprogram it over a USB port just like an Arduino. In fact we even made some simple modifications to the Arduino IDE so that it works like a mini-Arduino board. You can't stack a big shield on it but for many small & simple projects the Trinket will be your go-to platform.
This is the 5V Trinket. There are two versions of the Trinket. One is 3V and one is 5V. Both work the same, but have different operating logic voltages. Use the 3V one to interface with sensors and devices that need 3V logic, or when you want to power it off of a LiPo battery. The 3V version should only run at 8 MHz. Use the 5V one for sensors and components that can use or require 5V logic. The 5V version can run at 8 MHz or at 16MHz by setting the software-set clock frequency.
Even though you can program Trinket using the Arduino IDE, it's not a fully 100% Arduino-compatible. There are some things you trade off for such a small and low cost microcontroller!
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the picture below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed.
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
Consumer emergency water filterThis type of filters is offered on the consumer market under various brand names. Our Filter is distinctive because of the useful syringe. For more professional use and real assistance, we recommend filters that pre-filter more extensively such as the AQUA Logic - Siphon - C-Ultra or the AQUA Logic - travelmate - CCS
Ultrafiltration membranes with a pore size of 0.03 micron.
Filters: Pathogenic organisms: Log 6 bacterial reduction: >99.9999% (including Cholera, Shigella, Typhus, Klebsiella Terrigena, Legionella and e. Coli) and 99.9% Protozoan Cysts (including Giardia and Cryptosporidium) that produce waterborne diseases.
And Micro- and Nano plastics from a size of 0.03 microns (30 nanometers).
The AQUA Logic Travel Mini therefore greatly reduces the risk of contracting illnesses such as diarrhea, dysentery, and Giardia.
Always use the most clean water source that is available and preferably use the filter in a clean environment. This water filter is designed for relatively visually clear water.
Making use of the syringe
1. Prepare: Fill up the syringe by drawing water which you intent to filter. Open the mouthpiece cap of the filter and prepare a water container (e.g. glass, cup or bottle) to collect the clean filtered water.
2. Filter: Connect the full syringe to the inlet of the filter and push the water from the syringe through the filter while collecting the filtered water.
Using your mouth:
1. Prepare: Attach the included inlet hose to the inlet on the bottom of the water filter.
2. Sip: Start using the AQUA Logic Travel Mini by opening the mouthpiece cap. Then put the inlet hose in the water and take 5 quick, strong sips from the mouthpiece to get the water flowing.
Using a plastic soda bottle or water bag (e.g. Coca Cola):
1. Prepare: Fill up the bottle with the water which you intent to filter. Then screw the water filter on top of the bottle and open the mouthpiece cap of the filter.
2. Filter: Drink the water directly from the filter by taking strong sips and simultaneously squeezing the bottle to push to water out of the bottle through the water filter.
After use: Blow out the filter as much as possible through the mouthpiece, possible also by simultaneously sucking the filter empty from the other side using the syringe.
With the provided hose you can also connect and combine the AQUA Logic Mini Travel with an AQUA Logic mobile water filter.