Cisco IOS-XR Help - End of run not found

[Asad]

Hi All,

We are trying to add a few ASR9000 IOS-XR devices to Rancid 3.4.1. My issue seems similar to http://www.shrubbery.net/pipermail/rancid-discuss/2014-May/007597.html, I have un-commented NOPIPE=YES; export NOPIPE in rancid.conf and I have also tried to uncomment some of the show commands but it is still not working. To isolate any IOS-XR configuration issues I deployed a XRv with very basic configuration and I get same "end of run not found" error message.

Any help would be appreciated.

rancid@jp-script/opt/rancid#rancid -d -t cisco-xr lab-xrv-01

loadtype: device type cisco-xr

loadtype: found device type cisco-xr in /opt/rancid/etc/rancid.types.base

executing clogin -t 90 -c"terminal exec prompt no-timestamp;admin show version;admin show install summary;admin show license udi;admin show license;admin show variables boot;admin show hw-module fpd location all;show redundancy;show install active;admin show diag;admin show inventory raw;show debug;show rpl maximum;admin show running;show running-config" lab-xrv-01

PROMPT MATCH: RP/0/0/CPU0:lab-xrv-01#

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#terminal exec prompt no-timestamp

    In RunCommand: RP/0/0/CPU0:lab-xrv-01#terminal exec prompt no-timestamp

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show version

    In ShowVersion: RP/0/0/CPU0:lab-xrv-01#admin show version

TYPE = XRv Series

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show install summary

    In ShowInstallSummary: RP/0/0/CPU0:lab-xrv-01#admin show install summary

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show license udi

    In ShowLicense: RP/0/0/CPU0:lab-xrv-01#admin show license udi

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show license

    In ShowLicense: RP/0/0/CPU0:lab-xrv-01#admin show license

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show variables boot

    In ShowBootVar: RP/0/0/CPU0:lab-xrv-01#admin show variables boot

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show hw-module fpd location all

    In ShowRunning: RP/0/0/CPU0:lab-xrv-01#admin show hw-module fpd location all

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#show redundancy

    In ShowRedundancy: RP/0/0/CPU0:lab-xrv-01#show redundancy

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#show install active

    In ShowInstallActive: RP/0/0/CPU0:lab-xrv-01#show install active

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show diag

    In ShowDiag: RP/0/0/CPU0:lab-xrv-01#admin show diag

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show inventory raw

    In ShowInventory: RP/0/0/CPU0:lab-xrv-01#admin show inventory raw

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#show debug

    In ShowDebug: RP/0/0/CPU0:lab-xrv-01#show debug

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#show rpl maximum

    In ShowRPL: RP/0/0/CPU0:lab-xrv-01#show rpl maximum

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show running

    In ShowRunning: RP/0/0/CPU0:lab-xrv-01#admin show running

HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#show running-config

    In WriteTerm: RP/0/0/CPU0:lab-xrv-01#show running-config

lab-xrv-01: End of run not found

lab-xrv-01: End of run not found

end

Thanks

Asad