CRACK Kerio Personal Firewall V4.2.2 Keygen
0 views
Skip to first unread message
Gaby Barries
Jan 25, 2024, 6:47:37 AM1/25/24
to rajulilo
Hello
I have one switch 3750 and three switches 2960 with IP range 10.10.60.0 / 24 and the clients are connected to 2960 and 2960 is to 3750 trunk. I also want a 3750 port for a dmz hand with an IP range of 10.10.10.0/24 and a port for a lan hand with an IP range of 10.10.12.0/24. The firewall I used was software and I used kerio control. The third hand (wan) is connected to the Internet with an IP range of 192.167.2.0/24. Now I have run the ip routing command on 3750 and the clients see each other and can ping each other and this routing is done through the switch. How and what command should I write so that network traffic first goes to the firewall and then routing from there?
Kerio ip in wan: 192.167.2.2 with gateway: 192.167.2.1
Reply all
Reply to author
Forward
0 new messages