QLab Pro 4.5.4 Crack MacOS MacOSX
Outi Foote
Please could some point me in the right direction. I'm needing/ wanting step by step guide on how to trigger my cues using to timecode from qlab. (I'm wanting to time it with a song, rather than me manually pressing go in time, just wanting the one go at start with song).
first question is whether you want qlab to send out timecode into eos (which I think is a bit complicated over the network), or just to trigger the start of a sequence in eos. I usually do the latter.
4/ in qlab, create a network cue, set the patch to the network patch you created in step 2, and give it a type of "OSC message", in the big box enter "/eos/cue/1/fire" - when you run this cue you should see cue 1 being fired on your console. If you change the number "1" in the message to other numbers, you should see the corresponding cue in eos fire.
As for the ballooning I've only ever had this once: and discovered it to be my fault. I made a stop cue which was trying to stop something that had already stopped. Once this was corrected the show ran perfectly. Although I have crashed qlab while programing a few times. If it does Ballon during a show you don't need to reboot just press ALT CMD ESC at the same time and force quit Qlab.
A mac book air with a 1.7ghz CPU is not really suitable for running video on qlab I would say despite the SSD. What format and codec is your video running in? Chaging this and creativly using loads may help you out.
aa06259810