Raise3D

Toby- Please describe what you mean by "...knock the stepper out of register". I am

Copied from the Raise3D forum site: Dear Raise3D Community, As we have informed you recently, we were

On the newer machines somewhere on the side or back of the touch screen there should be a reset

Wow! I know I've complained a bit, but I LOVE my N2! When I have a project that can be effected

Z axis stepper driver was bad. They're sending me a replacement.

http://www.thingiverse.com/thing:1409412 On Wednesday, June 15, 2016 at 1:44:17 PM UTC-7, Ian Soler

Replying to the list this time. I created a spool holder as well (to deal with wider spools and/or

Werner, Thank you so much for the information, I really appreciate it. I have a V2. Peter On Tuesday,

+1 I find that people, particularly diy/makers, do not like being told they are doing something

Have you seen my Many-maker - Go from 3D printing to Desktop Injection Moulding campaign? Have your

Derek, I suggest not pointing to industrial machines as your reasoning behind using a raft. Bad

Did you get the backup one? It has been sevral days. 在 2016年2月24日星期三 UTC+8下午1:09:58，Duplicat写道： Are

Indeed – the small setscrews were loose. Thanks! Am Dienstag, 23. Februar 2016 00:51:37 UTC+1 schrieb

You can get a 12x24 piece of PEI on eBay from Zoro tools for ~$30 after shipping. I have PEI on all

Congrats! 在 2016年2月17日星期三 UTC+8下午2:35:53，Dave Hylands写道： I put together a blog post with a bunch of

The hook and loop stuff is way far away from the hot area. It's between the fan and the block

Does anybody know if the R3D printers come with CE declarations? These devices are for private end-

Thanks Joe! We will keep hard working! 在 2016年2月14日星期日 UTC+8下午8:49:15，Joe Brunson写道： These Guys are

You could get in. But if the government don't want to you to get in.. They could simply shutdown

Claps! Looks good! 在 2016年2月13日星期六 UTC+8上午7:53:08，Jetguy写道： I stole the one from the original strip.

What did you use to cut that vent? Looks very good. Did you take the panel off to cut it or did you

I've been printing all in PLA. I am holding off on ABS. I suggest others do too. Why? Because ABS

When I print a 2 layer box sized 305 x 305 I find that it takes the extruder all the way right to

just emailed her... by the way, is this the connector for the led light? it is just loose in the

You hacks are welcomed! :D 在 2016年2月7日星期日 UTC+8上午7:15:02，Andy Cohen写道： The air should be pointed to

Slowing it down helped... Getting the nozzle heights perfectly aligned helps even more! I'm

There is a layer of protective film on the LCD, you can peel it off. 在 2016年2月6日星期六 UTC+8上午10:43:56，

Congratulations,, great post. On Tuesday, January 26, 2016 at 12:49:03 PM UTC-5, Vernon Barry wrote:

Crazy speed indeed... 在 2016年1月27日星期三 UTC+8上午2:30:08，阿俊写道： Drew and printed this luggage tag in a