Chasemapper and rs1729 decoder

[RS_PL]

Hi,

Is it possible to send frames with the position of the radiosonde directly from the rs1729 decoder to the map in Chasemapper? I use pos2aprs and the position of the radiosonde is visible in APRSmap. I would like the position to be visible to Chasemapper. Maybe there is some tool to change aprs to the appropriate output for Chasemapper? I use auto_rx in conjunction with Chasemapper, of course, but I would also like to try if Chasemapper will work with a simple decoder with an rs1729 respository.

[Mark Jessop]

You would have to convert it to one of the formats listed here and send it to chasemapper via UDP broadcast:

https://github.com/projecthorus/chasemapper?tab=readme-ov-file#telemetry-sources

Not something I plan to write, given auto_rx already does this.

73

Mark VK5QI

On Fri, Feb 7, 2025 at 11:28 PM RS_PL <sonde2...@gmail.com> wrote:

Hi,

Is it possible to send frames with the position of the radiosonde directly from the rs1729 decoder to the map in Chasemapper? I use pos2aprs and the position of the radiosonde is visible in APRSmap. I would like the position to be visible to Chasemapper. Maybe there is some tool to change aprs to the appropriate output for Chasemapper? I use auto_rx in conjunction with Chasemapper, of course, but I would also like to try if Chasemapper will work with a simple decoder with an rs1729 respository.

--
You received this message because you are subscribed to the Google Groups "radiosonde_auto_rx" group.
To unsubscribe from this group and stop receiving emails from it, send an email to radiosonde_auto...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/radiosonde_auto_rx/f8c36254-4cb3-4549-9bd5-e83faa98ab39n%40googlegroups.com.