radiosonde_auto_rx

While I'm sure everyone enjoys a clean duct, I've put this email address on the moderate list

Hi everyone, From a couple of months ago, i am unable to send emails, the reason seen on the log is

Only having issues with my deck. https://www.youtube.com/watch?v=i6c4Nupnup0 -- Michaela Wheeler

Please note that the tutorial was not produced by me, and uses the 'native' installation

A lot of emails appear to be getting trapped by the google groups spam filter, unsure why. The

OK, good to hear you found the issue! (And I'm glad it wasn't a software issue in auto_rx :-)

I fixed this in a recent patch. It happened because Debian Trixie adopted a new version of the math

Hi, you are probably getting auto_rx confused with rdz_ttgo_sonde. Auto_rx runs on a Linux system,

That's kind of what I was thinking. That would be great! Thanks for the consideration. 73,

You were right about the usb and vm. Everything started to work after i installed the software to the

We only support ka9q-radio setups on either a Pi 4 or newer. All of my setups are running on RPi 4s.

Yes, perhaps a start-to-finish guide for KA9Q-radio + Docker auto_rx is warranted. Something for when

Yep, very confident of that now! I've raised some issues on the rdz_ttgo_sonde and dxlAPRS-SHUE

You would have to convert it to one of the formats listed here and send it to chasemapper via UDP

Hello Mark, thank you very much for your quick help. Based on your advice, I managed to detect the

https://xkcd.com/3032/

Just to close this one out, the issue here was a permissions issue due to auto_rx having been run as

Hi all, I've now had a few reports from stations running the old "Auto_RX-Prebuilt1.3"

Thanks for the info Mark, I was looking at getting an R2 the other day. I will consider that option.

Happily my Raspberry Pi that I installed your programming on from a separate web site that had a full

:) Hi Mark is the Best. 73 sp3rat Dnia 15 grudnia 2024 11:39:35 CET, pmafer <pma...@gmail.com>

Hi Chris, Until recently, there was a bug in ka9q-radio which caused the "calibrate"

Hi, Thanks for the answers.That was it ! I'm not familiar with python and this venv. I didn't

Thanks Mark, I've checked different things and came to the conclusion that there is no problem

Are you running these inside Docker containers, or directly on the Linux system? If in Docker, you

Oddly enough, emails were working again this morning. This is with a @gmail.com address. The only

I was tracking a Dulles HAB at the time - here's a snap of the track file showing a dropout at 12

I'll follow up on this with our reasoning for not providing RPi images here: https://github.com/

Just about two years ago I had problems connecting three RTL-SDRs to a Pi 4 and running the auto_rx

Hi i am a newbee on this system for reciving Radiosondes. I managed to get it to run with som start