Radioberry and Windows

[Tim ORourke]

I see that PiHPSDR is written for Linux.

This is for my old friend John, can I run HPSDR on windows and connect to Radioberry?

Tim W4YN 

[Gregory Zwierzchowski]

Use Thetis.

[Ricardo Suarez]

Hello

You can use Sparksdr2, includes FT8 and works ok

Rick LU9DA

--
You received this message because you are subscribed to the Google Groups "Radioberry" group.
To unsubscribe from this group and stop receiving emails from it, send an email to radioberry+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/radioberry/758828e6-15ba-41d2-8065-4d178f292823n%40googlegroups.com.

[Tim ORourke]

Thanks, last time I used Thetis was on my original Hermes, great program TNX Tim

[Tim ORourke]

To use Thetis I believe I need to have Juice board connected to Radioberry, is that correct?

Tim 

[Paulh002]

No, you can use the HPSDR protocol like hermeslight 2

--

You received this message because you are subscribed to the Google Groups "Radioberry" group.
To unsubscribe from this group and stop receiving emails from it, send an email to radioberry+...@googlegroups.com.

To view this discussion visit https://groups.google.com/d/msgid/radioberry/7a29b1cc-22fe-4eba-b281-720b83bccf05n%40googlegroups.com.

[pa3gsb]

Tim

Radioberry connected to RPI and than connected to the same network as your windows machine is psossible

https://github.com/mi0bot/OpenHPSDR-Thetis/releases/

Enjoy

73 Johan

PA3GSB

Op woensdag 15 oktober 2025 om 15:15:45 UTC+2 schreef tim....@gmail.com:

[Tim ORourke]

I have tried but so far the windows PC does not see the Radioberry

I will keep trying

Tim 

[pa3gsb]

Tim

RPI use ifconfig look for the ip address

Windows use ipconfig look for the ip address

also the subnetmask is important.

If these 2 are alligned it must be possible to connect.

73 Johan

PA3GSB

Op woensdag 15 oktober 2025 om 17:53:23 UTC+2 schreef tim....@gmail.com: