Radioberry without a screen

[Jatteau Marc]

Hello everyone,
Could you please tell me how to use a Radioberry and a Raspberry Pi 5 with a Linux PC via Ethernet, similar to a Hermes Lite without a screen? I'm referring to the software side of things, of course.
Thank you for your help.
73 Marc

[Samuel Lourenço]

Hi Marc,

Without a screen you just need to install the Radioberry driver, and you are ready to go. You just need to access the RPi via its IP address.

Kind regards, Samuel Lourenço

--
You received this message because you are subscribed to the Google Groups "Radioberry" group.
To unsubscribe from this group and stop receiving emails from it, send an email to radioberry+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/radioberry/17666d69-d50d-4d7a-949e-1083d2d5822an%40googlegroups.com.

[Jatteau Marc]

Hi Samuel
Thanks for the reply.
That's what I did, but it's not working.

I'm not sure I installed the correct firmware:

cd /tmp
wget https://raw.githubusercontent.com/pa3gsb/Radioberry-2.x/master/SBC/rpi-4/releases/dev/radioberry_install.sh
sudo chmod +x radioberry_install.sh
./radioberry_install.sh

It might not be the right one for the Raspberry Pi 5. ??
I haven't installed PIHPSDR.

73 Marc

[jatteaumarc]

Hello
Thank you for your advice.
I have a Raspberry Pi 4; maybe it's doable.

73

---

From:	Jatteau Marc <jatte...@gmail.com>
To:	Radioberry <radio...@googlegroups.com>
Date:	jeu., avr. 23 2026 05:35:43AM UTC+00:00
Subject:	Radioberry without a screen

Hello everyone,
Could you please tell me how to use a Radioberry and a Raspberry Pi 5 with a Linux PC via Ethernet, similar to a Hermes Lite without a screen? I'm referring to the software side of things, of course.
Thank you for your help.

73 Marc --

[pa3gsb]

Marc,

https://github.com/pa3gsb/Radioberry-2.x/releases

The link you want to install on a rpi-5 is meant for rpi-4 and will not work on rpi-4.

Johan

PA3GSB

Op vrijdag 24 april 2026 om 07:56:04 UTC+2 schreef jatte...@gmail.com: