RP2350-SDR-CW-Interface

[pa3gsb]

Hi All,

Maybe CW fans like this.

https://github.com/pa3gsb/RP2350-SDR-CW-Interface

Enjoy

73 Johan

PA3GSB

[KK7OEA]

I’ve been waiting for a device like this for a long time. I tested it, and it works perfectly with Hermes Lite-2, Thetis on Windows. I am especially grateful for the feature of single paddle CW key. The device also allows for use with WSJT-X and SSB. If you use WSJT-X, don't forget to turn off the WM8960 microphone boost in Windows; otherwise, the microphone will add room noise to your transmission. I'm sure it's possible to set it up via software so the microphone turns off when using WSJTX, but I'm not a programmer—it's easier for me to do it with a soldering iron. 

[Rick Koch]

Tnx Johan for this project. I had a WaveShare RP2040 and wm8960 board on hand so I set

out to port it and get it working on that. So far it initializes and I get audio devices and tones

generated when using paddles.

If anyone has an RP2040 and wants to give it a try check out my repo:

https://github.com/n1gp/RP2040-SDR-CW-Interface,

there's a uf2 in the release DIR

Let me know what doesn't work...

-Rick / N1GP