Universal Keyboard Driver Windows 10

0 views

Skip to first unread message

Gabelo Camphire

unread,

Aug 4, 2024, 6:35:32 PM8/4/24

to raccarera

ThinkOutsidewas a startup that produced pocket-sized folding keyboards, initially for Palm serial devices. Their later offerings include infrared, Bluetooth, and Pocket PC support. Their last driver offering for Palm OS (just after being bought by Mobility Electronics, which then renamed itself to iGo) quietly included support for their Bluetooth product on some devices. Some Targus stowaway keyboards are rebranded ThinkOutside keyboards, and work with their driver.

Unfortunatelly PS/2 ports are not working and they won't (there is no voltage), so I have to use USB peripherals.

The problem is mouse and keyboard are working fine in Safe Mode and they aren't in Normal. Tried few things and nothing.

Due to my KVM (USB to clients) I have to use a dedicated mouse and keyboard for 9x and 2000 otherwise I can't use my mouse and keyboard. Works fine in BIOS and DOS though. Sometimes I can get it to work properly then it glitches out again. Still haven't figured it out. For the mouse it may or may not move and when it does move it barely does. For the keyboard it'll type slowly and then repeat characters dozens of times. heh. Likely a driver issue with the OS and the iogear KVM.

I think safe vs. unsafe mode is because Windows goes through the BIOS to access mouse/keyboard in safe mode, or at least doesn't do whatever initialization of usb that would cause the bios to stop emulating the keyboard.

For PS/2 ports though, I have an actual PS/2 that had that problem because of a blown fuse and I was able to replace it. I thought newer motherboards are supposed to have self healing fuses.

The only thing I can think of is that this model of Dell Precision was not tested in the Fall Creator update back in OCT17 by Dell. Drivers were not updated, so either some other driver might work or there is no telling if something could hose the drivers all together. It also could be possible that Windows 10 is not supported for this machine all together.

Another possibility is that someone could have plugged something into the USB ports causing Windows to flake out for I/O device drivers. I did one more test and was able to read/write a flash drive, but not a desktop scanner or other brand/model keyboard and mouse.

I was having this same issue, just with a different model of keyboard/mouse (Dell machine and wireless keyboard/mouse combo) and after uninstalling the KB4074588 update like michellelieske suggested, the issue was resolved. I was able to remote into the machines and uninstall that way. My best guess is that it was a registry change made by the patch that caused the issue.

The issue was that most USB devices would not be recognized, as well as the touch screen would not work. The USB devices would return a code 28. For example, plugging in a mouse would cause the red light on it to appear for several seconds before turning off. I had tried disabling selective suspend by editing the registry and a lot of other unsuccessful items.

You can update your drivers automatically with either the 7 days free trial or the Pro version of Driver Easy. It takes just 2 clicks, and you get full support and a 30-day money-back guarantee with the Pro version:

Updating software usually helps the system stability and optimization, so at this point, if your keyboard still refuses to work, please also make sure that your computer BIOS is updated to the latest version.

Current functionality of these input devices are limited, incomplete, because though the drivers are there the .inf file to use those drivers in Windows 10 does not work. At least thats the conclusion I have arrived at.

The keyboard works (Bluetooth devices: AppleMagic connected) for typing, but FN keys for Previous/Next or Volume up/down do not work. The Magic mouse 2, works with left and right button, BUT there is no Scrolling and even less side swipe gestures.

Therefore I go back to Update Driver, and choose Browse my Computer for drivers software, I choose a folder where I have uncompressed: AppleKeyboardInstaller64.exe from Bootcamp (5.1.5722*), which includes: KeyMagic.sys and KeyMagic64.inf among other files. I understand the .sys is the main driver file, while the .inf is the requested info file for instllating devices in Windows.

Moving back again to: Let me pick from a list of available drivers in my computer > Select the device driver you want to install for this hardware. I click the button: Have Disk, and move to the folder where the KeyMagic64.inf is.

Your 2017 Mac cannot support any BC 5.x drivers, which are meant for W7/W8.1. You need BC6.x drivers. Can you click on BC Assistant -> Action -> Download and download BC drivers to a USB2 flash drive and re-install them and test?

Why this happens? Because the apple drivers are not installed. Apple has done the hard work of writing the drivers code that allow using the keyboard and mouse on a Apple running Windows with Bootcamp. But the installation file .inf, as far as i know and tried, does not allow or is unable to load/install those drivers (available on Bootcamp for Windows) on a Windows 10 installed on PCs.

The same set of steps can be re-used. Once you have created the USB2 Flash drive on the Mac, move it to the Windows PC, and then, manually, install each driver that you need on the PC.

I do not understand the second step: Run BC Assistant -> Action -> Download, as I do not have BootCamp installed on the MacBook, as I have told you already, I use just the OSX Mojave for running Adobe apps.

Meanwhile, I did something you had suggested in the past: I got Brigadier and downloaded BootCamp drivers (v. 6.1) and place them with Bootcamp.msi in a folder and installed them. But still Windows 10 chooses to use Microsoft drivers and the steps detailed before have been unsucessfull (Update drivers>Have disk --> go the folder where the .inf and .sys are).

Bootcamp Assistant is in Applications -> Utilities -> Bootcamp Assistant. It can be used to either install Windows or download BC drivers. You do not need to install Windows, but you need to Download the drivers only.

If you have the same devices paired to more than one computer, you may run into additional issues. Since both your devices require BT, you must have at least a functional BT radio in your Windows PC, which allows pairing. It need not be a Broadcom radio.

(I have seen a video talking about some OSX drivers: keymagic64.inf_amd64_ ..... that update the already installed Bootcamp drivers, not sure if they are really needed for accessing Volume keys on windows 10 on my PC).

Plug-n-Play (PnP) devices have been around for quite some time now. Most hardware, such as keyboards, take advantage of this feature.

Therefore, connecting a wireless mouse is typically as simple as just plugging the accompanying USB receiver into an available USB slot and allowing Windows to set everything up.

Test removing and plugging it back in. You can also test plugging it into another USB port.

If nothing still occurs, check the keyboard itself for a button (typically on the backside) that forces a sync with the receiver.

Every device on your computer requires software that communicates between the hardware and the operating system. While this software, called device drivers, is required for your hardware to work properly, it can also be the cause of issues surrounding it.

The reasons for this can be poorly written drivers, incorrect drivers being used, missing drivers, or drivers that need to be updated in order to continue working with (an updated) Windows operating system.

You can use software, such as Driver Support, to automate the task of searching for and installing the latest drivers for your hardware. This approach not only keeps your hardware updated, but does so without requiring your efforts.

Keeping all the device drivers on your computer current can become very time-consuming. Consider offloading this burden to Driver Support.

Once installed, Driver Support will inventory your computer for all supported devices. The fully registered service will update any driver that is missing or out of date.

The good news is that keyboard drivers are very stable and rarely need to be updated. However, if you notice strange behavior or unresponsiveness such as the keyboard automatically typing, then it may be time for an update.