Toyota 7 Series Forklift Error Codes
Kensel Whiteman
Intella offers fast and reliable shipping across the US and Canada with next day delivery available when needed. Click on the shipping tool above to calculate the delivery cost of your toyota analyzer 8 series 09240-26600-71. Feel free to contact us at 616-796-6638.
We want to make sure you order and receive the right part to fix your forklift. Please review the return policy before and click the box on the prior screen before ordering. If you have any questions at all, please call us 616-796-6638; we can help ensure you order the correct electronic part for your forklift.
Hi
The solenoid valve is plumbed to an existing lift truck hydraulic function. When the button is depressed the solenoid valve changes the direction of the hydraulic fluid from its original function to the additional function.
Hi I have jac battery counterbalanced forklift truck model CPD25 and problem with it can move front and back. Alarm 101 warning 89 n 91. Please if you can help me in rectify the fault.
Thanks,
Vinesh Gounder
I have an H70FT diesel. I removed engine to replace flywheel. Runs well and all functions work. But I have a code Its
100-4. Dashboard is showing hydraulic inter lock seat. Checked connection at seat sensor. Any thought
I assmned was hydraulic oil low,
How do i errase the error code, or if keeps showing up.. what are the ootions of dealing with this erro. Ive checked the pumpmotor and it is working. Not 100% sure if pump is working , i do not think it will fail suddenly..
Any ideas ??
Hi
This error code warning you about the connection between the accelerator pedal and distributor
Check the harness between pedal to go through the engine and also check the connector in the right step and the connector in left step to computer
Hi
We have a Raymond forklift Model 4450 . the forklift is working but it is the error code C4 in the monitor .
Do you know what is this error code and is it dangers or is it any way to remove this error code?
Hi
I have a forklift Raymond Model is 4450 and the error code 1c is show me in the dash I unpluged and pluged the battery but samething I have and when I want to go reverse the speed will be too slow or will stop the forklift.
Do anyone have the idea what is wrong with it? and what is the solution.
I am so far from the big city and it is not easy for me to ask dealer to solve this issue because they will ask 4 to 5 heurs distination charge.
We have a Hyster forklift and while driving along the forklift will cut off and show a code 8976 and this is a safety issue because the forklift has to coast to a stop because the brakes inop when it cuts off.
check the switch and wiring the hood for code 204 the hood has a switch on it to disable operation if it is not closed,
and code 208 check the battery:
make sure the battery is filled and fully charged and has no problems in any of the cells
Hi,
error codes 260 for low voltage to pump motor :
you have checked both of the pump motor cables and checked the pump motor for continuity, I would start with checking pump cables for short to frame. Does the truck drive? If not check for the voltage drop across the main contactor. If all checks OK. You probably need to replace the controller
:)
Regards
Malfunction of the start switch circuit. Check for open circuit or loose connections in wiring from the key switch to start switch and from P16 to start switch.
Malfunction of the start switch. Check the start switch for correct operation and output.
The code 61 is a steering error, outside of the steel brushes being bad the relay on the steering controller may not be closing causing the problem. maybe the relay is bad or wiring to the steering controller.
my yale mpw065sen12t2748 pallet jack keep stopping after about 15 seconds. After reboot, it will lift and move then suddenly stop again. The error code it shows is 33. What could it be and how can I correct it?
Yale ERC040ZGN48TE084. No mast functions and codes are 144 (Transistors did not shut off) and 141 ( Pump control temp too high).
Can jump to the ground that goes to lift motor and motor runs. Is it time for a control box for the lift motor?
I have a Hyster (sit-down) Forklift E60XN-33 throwing error code 12832. Everything operates properly from my observations. It was reported as having a steering and braking issue. I drove it for an hour without consequence. Any ideas?
The EP107 is not alarmed code, this is most likely the Model and software versions that flash on display when first turning on the machine.
Alarm codes are ALxx codes generally for zapi control systems.
If it is not displaying any codes on the display gain access to the controller and look at it, there should be a light flashing on it, see if it is flashing in any pattern. The pattern will probably be in intervals showing the 2 digit code, flash x number of times, pause for a sec and then flash the 2nd digit, then pause for 3 or 4 secs or so and repeat.
I am having the same issue with my Yale Stacker forklift. Continues to beep in motion forward and backwards. When I first received it, it only beeped in reverse. Code 213 comes up when it is first turned on
1) Loose or damaged elec. the connection between control card and controller. Verify connection at controller, verify wire harness connection at the base of steer handle, verify connection at control card.
1) Loose or damaged elec. the connection between the control card and controller. Verify connection at controller, verify wire harness connection at the base of steer handle, verify connection at control card.
Error Code 522660-1 appeared on the screen. Tool light came on for a while. Then went off. Now it is flashing once in a while. Forklift continued to run just fine. What does this mean and what is needed for repairs?
Hello,
I have an electric lift truck , yale m# erp040thn36te084, while driving the operator said that it would not function, lift, tilt, or side shift and reported that there is an error code on the display. 208 is the only thing it shows, no dash, no other numbers or symbols, except for the flashing red wrench.
Please advise, thank you.
Aloha, I have a Crown C5 we had for about 3 years now and this is the first time this error came on and we can not move the lift. The error says park. PARK BRAKE EREOR. Is this something simple or easy way to repair or fix this.
We have Hyster D456T05451T, and time after time we get this code on screen 141A02. Forklift is mowing very slow and not lifting up the forks. After day or two this problem is gone and all work perfectly, Any ideas?
This code indicates a loss of communication between the system manager and the pump controller through the Canbus.
check your connectors at the VSM and the hydraulic controller. The wires you need to check are the green/ yellow twisted pair. And also there could be a failure in one of the controllers.
Limited traction performance until code is cleared. The brake is activated when the engine stalls. Reason TA detects that the traction motor has stalled for 5 seconds. Tests to Run Use the service key and test the traction motor encoder by scrolling to the RPM display (D) in the diagnostic screens and command the motor to run. The displayed value is the engine speed as reported by the TA.
We have a TCM 4-way reach forklift model FRB25-8M and I am getting an error code 508.I think it has something to do with the electric power assisted steering as it is very hard to steer.Would anyone know what code 508 is for?
Error code 508: typically indicates a problem with the controller area network (CAN) communication system. This error code may indicate a problem with the wiring or connections in the CAN network, a defective control module, or a malfunction in the software.
The contactor, which allows electricity to pass to the motor, is malfunctioning. The forklift might not energize if the contactor is malfunctioning. The model and brand of your forklift will affect the price of a replacement contactor.
Faulty controller: The controller is responsible for regulating the speed and direction of the forklift. The forklift might not ignite if the controller is malfunctioning. The model and brand of your forklift will determine the price of a new controller.
Error 128 02 on the Yale ERP18VF MWB loader indicates a fault with the accelerator pedal position sensor. This sensor is responsible for detecting the position of the accelerator pedal and sending a signal to the engine controller to adjust the speed of the loader accordingly.
To resolve this issue, you may need to check the wiring connections to the accelerator pedal position sensor and make sure they are properly connected. If the wiring connections are ok, you may need to replace the sensor.
An electric narrow-aisle reach truck is the Hyster N45ZR2. The following problems are indicated by the error codes you provided:
40060: This code indicates an issue with the traction motor thermal sensor.
40062: This code indicates an issue with the lift motor thermal sensor.
10104: This code indicates an issue with the encoder signal from the drive motor.
90104: This code indicates an issue with the encoder signal from the lift motor.
90075: This code indicates an issue with the brake switch or its wiring.
These error codes suggest that there may be problems with the motors, their associated heat sensors, and the encoder signals coming from the motors. Moreover, there can be a problem with the wiring or brake switch.
Code Title Communication Error with the HF Charger
Operator Display E250
System Response No truck function active
Reason HF Charger CAN communication issue.
Tests to Run None
How to Clear Verify the CAN cable to the battery pack is connected.
Code will self-clear after plugging the charger into AC power to reset the charger
from sleep mode.