Groups

R2C2 - Support

1–4 of 182

0 selected

César Araújo, … Rui Ribeiro9

1/22/15

Hi César, Look at this photo to see where to put the GND, RX and TX wires. Please note RX and TX is

unread,

Hi César, Look at this photo to see where to put the GND, RX and TX wires. Please note RX and TX is

1/22/15

Albert Latham, … lionel...@gmail.com9

8/27/14

Hotend not heating.

By the way, the thermistor lookup table can be updated without having to re-flash the firmware. For

unread,

Hotend not heating.

By the way, the thermistor lookup table can be updated without having to re-flash the firmware. For

8/27/14

rald...@mac.com, Jorge Pinto2

4/24/13

Trouble reading the extruder thermistor.

2013/4/19 <rald...@mac.com> I added some debugging code to the firmware, and it reports ADC

unread,

Trouble reading the extruder thermistor.

2013/4/19 <rald...@mac.com> I added some debugging code to the firmware, and it reports ADC

4/24/13

repl...@gmail.com

2/7/13

Forward and Reverse = same direction

Hello, The forward and reverse buttons in the RepG control panel run the extruder in the same

unread,

Forward and Reverse = same direction

Hello, The forward and reverse buttons in the RepG control panel run the extruder in the same

2/7/13

Search

Clear search

Close search

Google apps

Main menu