Current Release of QuSpin ZFM UI

[James Osborne]

We have released an updated UI that adds convenient features for controlling the ZFM sensors as well as displaying sensor status data simultaneously for all connected sensors without excessive CPU resources usage (especially noticeable in larger arrays). Please direct any questions and feedback about the QuSpin ZFM UI to j...@quspin.com. 

Link to current version: QuSpin ZFM UI 6.5.8

Previous version: QuSpin ZFM UI V6.3.8

Sensors Tab:

This tab displays the serial numbers of all connected sensors and has buttons for selecting whether commands will be sent to that sensor (via the command buttons towards the top of the UI) and which sensor will print data to the chart in the Charts Tab. 

Sensors displaying ON to the left of the serial number will receive commands, and ones that display OFF will not receive commands. 

Press PRINT once to start printing data for the sensor and again to stop printing data. The LED to the left of the PRINT button will be ON (green) if print is active. 

Charts Tab:

The serial number of the sensor that has PRINT selected in the Sensors Tab will be displayed in the "Sensor" field above the chart.  

Sensor Info:

The serial numbers and corresponding COM ports are displayed in this tab, as well as sensor calibrations after calibrate is run.  The buttons referring to ~ Parameters should only be used after instruction from someone at QuSpin. 

QuSpin Resources:

Here you will find button links to relevant QuSpin web pages and the Discussion Board. The sensor command list is also displayed in this tab. 

[Ekaterina Skidchenko]

How is the process of recording data from magnetometers carried out? I can not find the 'Saving' button or choose the File Path (Folder).

пятница, 9 августа 2019 г., 23:27:40 UTC+3 пользователь James Osborne написал:

We have released an updated UI that adds convenient features for controlling the ZFM sensors as well as displaying sensor status data simultaneously for all connected sensors without excessive CPU resources usage (especially noticeable in larger arrays). Please direct any questions and feedback about the QuSpin ZFM UI to j...@quspin.com. 

Link to current version: QuSpin ZFM UI V6.3.8

Previous version: QuSpin ZFM UI V6.3.7

[James Osborne]

This version of user interface does not support recording of digital data. The current release of the UI can be used with a DAQ to record analog data. The QZFM UI V3.2 will need to be used for digital data recording.