[Vcarve Pro Torrent
Rapheal Charlton
Hello we are new to lightburn and laser itself. we designed a rummy game on lightburn. we will be burning all the text and images of the game onto wood using lightburn. we then want to drill the peg holes and cut in card pockets using our cnc router. Is there a way to save what we did in lightburn into a different format like .BMP, .JPEG, GIF, TIF, TIFF or some other format so I can transfer it to vectric vcarve pro. thank you
Hello Jeff. yeah when I downloaded lightburn I was quite impressed on the amount of different buttons that there were for a $40 program, compared to $700 for vcarve. My wife will be using our laser more than I will so she has been studying lightburn a lot more than I have. I imagine that I will be moving over to using lightburn more as time goes on. But for the moment I probably stick with vcarve at least until things slow down a little here. thank you
Thank you! Aspire is built to directly interface with vcarve, correct? I have read that exporting from shapr to vcarve creates lots of problems with the vectors duplicating and intersecting to such an extent that it is too complicated to clean up. I have vcarve but not Aspire,have you exported directly from shapr to vcarve successfully without having to go through Aspire? Thank you again
Again, thank you so much. Shapr looks amazing to me and I am considering it to design wood furniture that has carving elements such as scrolls, curves, and graphic etc. Buying the iPad for shapr is the issue for me, and I just want to be certain that shapr will interface well with Vcarve as we had someone send us a project made in shapr and after importing into vcarve there were a lot of problems with the vectors and I have read of similar issues from other users, but it sounds like you have had success in this area. Very grateful for your replies
The concern I have is when you say vectors. Drawing behavior may be different than STL files. For example, when I export a drawing or sketch for use for a plasma cutter, water-jet, or laser cutter, the top view ONLY must be used (at least for now). If side views are exported, then you will experience an issue. When I need a part cut from a side view, I rotate it to the Top view, then export only that view and only that component. For using 3D STL files however, you will be fine.
@leifnicklas I am curious what the outcome of this was. I started going to school for woodworking and find myself struggling greatly with VCarve Pro. I have been looking for something I am more comfortable with and came across Shapr3D. I like so much about the program but before I dive in headfirst l was curious if you were able to export to VCarve without have to mess with changing vectors?
Aspire allows you to modify the STL file, but not by vectors. You can smooth edges, smudge, extend, etc.
Info not believe VCarve enables the same capability. However, Aspire is a significant investment.
So I've read several threads and have used various ways to approach conversion of a fusion 360 file to dxf or something readable for vcarve (we have a shopbot which we primarily use vcarve for). Basically I found a solution on youtube that seems reasonable: projecting the sketch face of each component to save as a dxf. However, this is not entirely working. If there is an easier way, please let me know. Otherwise, please help me and point out anything I may have done incorrectly.
I understand you've already got momentum with VCarve. I used it for years and tried to do the same thing with a Fusion - VCarve workflow. Then I gave Fusion CAM a try and never went back. If you're willing to give it a try, this class I made for Insturctables might be helpful: -Class/
Has anyone been able to run vcarve pro on a Biesse Klever. If so what did you have to alter in the post processor. Tech support with vcarve told me that they would not be able to help me past there stock biesse post processor.4/19/14 #2: Vcarve and Biesse ...
yaakov katz
cix? cid ? or iso?4/19/14 #3: Vcarve and Biesse ...
Randy Member
iso
4/19/14 #4: Vcarve and Biesse ...
yaakov katz
why??
its clever machine ,no 5 axis why not pass the BSW?
iso its very complex and now with the nulti center plc becomw worth10/19/14 #5: Vcarve and Biesse ...
Alien Member
I really wanted to use Vcarve with my biesse but in reality I found my machine would only handle 1000 lines of code and the way they handle arcs with small segment line the 1000 lines ate up pretty quick. Also they did not want to make any effort at all to help me with a tool file at all. so I would guess the support would be the same way.11/3/14 #6: Vcarve and Biesse ...
jack
most of the issue lies around the multi center and the first work begin line needing to be modified. Ask Biesse if they have the converter you need to convert the standard code into the correct code to run the machine.11/3/14 #7: Vcarve and Biesse ...
yaakov
file/seting/machining opertiion
in the butom you can modify the max machining oper.
if you still need write
pp from vcrave to cix(bsw ) send me mail2/13/20 #8: Vcarve and Biesse ...
Courtney
I have created a perfectly working post for BIESSE rover machines. Contact me and I can get you setup3/23/20 #10: Vcarve and Biesse ...
dh_dave Member
Running Vcarve on a 2016 Biesse Klever.Recently I got in contact with Courtney he has a written a working Post Processor that works with Vectric and Vcarve Pro, he provides the Post and support for a fixed fee to make it work with Rover and Klever Maschines
Post a Response
- Notify me of responses to this thread
- Subscribe to email updates on this Forum
To receive email notification of additions to this forum thread,
enter your name and email address, and then click the
"Keep Me Posted" button below.
Please Note: If you have posted a message or response,
do not submit this request ... you are already signed up
to receive notification!
Your Name: E-Mail Address: Enter the correct numbers into the field below: Date of your Birth: