[Eyetoy Usb Camera Namtai Driver Windows 10 32 70
Addison Mauldin
-EyeToy USB Camera (The one I used was an early model and was manufactured by Logitech, later EyeToys were manufactured by Namtai. I have not tested the driver with a Namtai made EyeToy but I am pretty sure it will work.)
Before we can begin discussing the program, we need to install the EyeToy drivers, since there is no official PS2 EyeToy driver for Windows. I followed this guide and got it working on Windows 10: -eyetoy-on-windows-8-64-bit-working/
From the Device Manager, find the EyeToy, right click and select Update Driver. Select let me pick from list -> have disk -> locate the unzipped driver folder and select HLCLASSIC.inf. Click continue when prompted about the unsigned driver. Once finished, re-enable driver signing enforcement like so:
So I wonder how you made it through.
Have you found a way to trick the installer into thinking you have a genuine Hercules webcam ?
Were you able to extract the driver files from the .exe file to install them manually ?
Or was your webcam recognized by the installer from the start ?
The hardware Id of my webcam is VID_054C&PID_0155.
I tried to change the PID in the .inf file as you said, and I also tried to change both the VID and the PID.
But each time the driver installation ended with the same error I reported in my previous message.
It seems these eye-toy devices do-not run with the driver I mentioned in my blog. Drivers sometimes work on devices they were not written for, but in most cases they will not work or have problems as have been mentioned.
The hercules driver I think is the only one that will work. It works for me and others. What happens when you try to use install them? Also what H/W version of the camera are you using? I am using version B1.
Finally, a tutorial that lead me to a solution for the Namtai PS2 Eyetoy vs Win7 x64 problem. Many thanks for this great tutorial. For those still trying to get their silver Namtai Eyetoy to work on a 64-bit system:
Follow the instructions listed above this post, as well as the responses to other posts, until you have the original Hercules driver folder (folder with large alpha-numeric name) saved on your computer. Once you have the drivers, open the Hclassic.inf with a text editor.
Replace;
Follow the instructions listed above this post, as well as the responses to other posts, until you have the original Hercules driver folder (folder with large alpha-numeric name) saved on your computer. Once you have the drivers, open the HCLASSIC.inf with a text editor.
edit the original HCLASSIC.inf
Thanks! Also works with webcam Dynex DX-WC101 under Windows 7 64 bit. The camera uses a certified driver from Microsoft for the micro (from windows update). The video is completed by the modified Hercules driver.
This is just great !!! Thanks a lot. I have spend a few hours looking for a way to get it work. With your post here it worked straight away .
Even for the Real Hercules Classic webcam I had to use your methode.
Hello everyone,
as mentioned above the procedure went fine on windows8. For your info, it also works on windows 8.1 .
Once you have stored the result of the setup program (ammended if necessary) you can use it very time.
I was a bit to optimistic about the functioning on Windows 8.1 (may be also on 8.0 platforms). At startup of the PC the webcam works fine but after awaking from sleep mode it remains dead until the next startup. Anybody a solution??
Chris
anyway to do this for Windows 7 64 bit with an intel pocket pc cam CS630 ? I can get it to work in compatibility mode on 32 bit Windows 7 but no go on 64 bit. It has 2 ini files one for the driver, one for the storage icm10cmp.inf and ICM10USB.INF
I have an old PC USB cam DC 4120 Chicony and have no drivers for it.I know for the trick of using drivers of Hercules classic cam as they have the same chip OV519, but there are some problems when trying to install it that way.
First of all I cannot finish installing process at all as it asks for CD or the right path.
When I try to find in temp files the serial number or a line of numbers and letters in order to manually install it I don`t find there anything as it shows it is empty folder.I cannot even find the right path as when I go to C/users/my name/there is no Appdata at all?
How to install this cam driver as I know it is possible.Once that trick worked out for me but it wasn`t me who did it, so now I dont know what to do.Please if someone can help me, I need my camera ready to use quickly.Thanks