Error 6 Solidsquad
Tarja Hempton
You may have encountered the following error (Invalid license server configuration) while installing Abaqus. In older versions of Abaqus, which means 6.12 to 6.14, this problem rarely happens. But in newer versions like Abaqus 2019, Abaqus 2020, Abaqus 2021, and Abaqus 2022 Abaqus licensing is done with SolidSquad, and this problem has increased (Abaqus FLEXnet License Server Issue).
To solve this problem, if you do the following things correctly, you can easily overcome the issues.Before starting to install Abaqus, create a variable similar to the one below and then OK all the windows. Maybe uppercase and lowercase letters are important, so write exactly as shown.
When the antivirus is turned on and you extract the files in the SolidSquad rar file, some files are immediately recognized as viruses by the antivirus and deleted, resulting in the Abaqus FLEXnet License Server Issue.
If the remaining license files are already on your computer, there may be an interference in the licensing process and it cannot be licensed properly. Therefore, be sure to pay attention to this point and delete the previous license files so that Abaqus FLEXnet License Server Issues do not happen.
The Abaqus FlexNet License Server is a software licensing system used by Abaqus software to manage and distribute licenses to users. It allows multiple users to access Abaqus software simultaneously while ensuring that the number of users does not exceed the number of licenses available.
The Abaqus FlexNet License Server works by first checking if a license is available when a user requests to use the software. If a license is available, it is assigned to the user and they are able to access the software. If no licenses are available, the user is placed in a queue and will be granted access when a license becomes available.
The Abaqus FlexNet License Server also allows for license borrowing, which allows users to temporarily use a license when they are not connected to the server. This can be useful for users who need to use the software while traveling or working remotely.
Yes, you can use an Abaqus FlexNet License Server with multiple versions of Abaqus software. The FlexNet License Server manages the licenses for all versions of the Abaqus software installed on the network. When a user starts an Abaqus session, the software checks out a license from the server. If a license is available, the user can proceed with their work. If no licenses are available, the user will need to wait until a license becomes available or contact the license administrator to request additional licenses. It is important to ensure that the version of Abaqus being used is compatible with the version of the FlexNet License Server being used.
We are a start-up company founded in 2016, with the mission to enable every engineering company to realize its ideas into products by using model and simulation-based product development. This technology auto enables the Industry 4.0 standard to the entity and assures the best product outcome.
Our team of passionate engineers, domain experts, and long industry-experienced advisor panel will provide a pragmatic, innovative, and simplified solution to any challenging engineering predicaments.
I have no idea how to write ksh script, but i'm really in need of help with this. I using fedora 30 and in attempt of runnig attached script i getting those errors, i solved first error by removing excess bracket, but i do not know what should i do with other. Pls sorry for trash post.
Oh, sorry, I really do not really understand this, I just need to fix the error in this script to install some software. I think I'll learn how to work with shell scripting later, now i just don't have time for this
If you really don't understand shell scripting WHY attempt to do a so-called fix.
Neo has given you a starter so let me make it a little clearer change/edit the first line #!/bin/sh to #!/bin/ksh and see if that matches your requirement.
As for learning it later, if you haven't got time now you will never have the time in the future...
Yeah, i know, i'm already apologized for that trash post. It's actually not my script, but i'm really need that script fixed for software that i need for study. So u have no idea why does the error appear?
The SOLIDWORKS error "A newer version of this application is already installed" occurs when installing, repairing, or modifying a version of SOLIDWORKS older than 2021 SP2, when 2021 SP2 or newer is/or has been installed on the machine. This error appears because of a change made in the Visual Basic for Application version 7.1 (VBA 7.1) introduced in 2021 SP2. Older versions of SOLIDWORKS Installation Manager do not recognize this new VBA 7.1, and will then try to install its own VBA when a newer one is already present.
That appears to have solved the problem. The file compiled locally with no errors.
I will do a reset environment when I have time this weekend and audit the other computer but this is my main development box and used for many things and that one has much less installed software.
While working with SOLIDWORKS support, I have received a lot of phone calls regarding activation errors. In the below section I have listed the most common errors when deactivating or activating your SOLIDWORKS license. I have also included what you can do yourself and if you need to contact your VAR.
If you find yourself in a situation where you are unsure what computer the license is active on, please contact your VAR, and they should be able to help you. If your old computer has crashed, and you have no way of opening your old SOLIDWORKS, you should also contact your VAR and they will be able to help you deactivate your license. To have your VAR deactivate your license should only be done as a last resort, as you will not be able to activate the license on the computer again. This leads us to the next error message.
While working with SOLIDWORKS support, I have received a lot of phone calls regarding activation errors. If you do this it becomes much easier to identify the issue, if you need to contact your SOLIDWORKS Value Added Reseller (VAR). When the activation error message it is important that you take note of the error message or take a screenshot. However sometimes you will receive an error message. In most cases this goes fine without a hitch.
To make it easier to identify and troubleshoot if an activation issue occurs.To ensure that no one is misusing your license.The Activation Manager registers the computer for two reasons: Your computer communicates with the SOLIDWORKS Activation manager when activating and deactivating the SOLIDWORKS license. I will in a later blog post cover the activation and license errors when using SolidNetwork License (SNL) What is standalone activation I will briefly try to go through the four most common activation error messages when using a standalone license. This is the first blog post regarding the SOLIDWORKS activation error message.
I have been getting an access violation error ending in 041A3E6C times a day now. After clicking "OK", TOAD shuts down. It seems to occur when I am working on something and not keeping the connection up. Thoughts?
I have been working on lost-connection-type problems in the beta, you might want to give that a try (keeping your current version installed also). You can get beta version here: Toad for Oracle 15.0 Beta
I don't know if there is anything special I do to get the error or not, as it doesn't seem to occur every time a reconnection occurs and I do something. But, I believe at least the last two times it was when the connection was lost and I clicked a table in the Tables tab with while the data tab was open. But, maybe I clicked on the Data tab from another one, too. I am relatively confident it was one of those two.
Our Core DB team manages the databases on a cluster, and I don't know the details of how they manage them. I am working on a 12c database in our Dev lane. I haven't noticed it on other lanes ... but I'm not working in other lanes right now. If I get a chance, I will try test or two on TOAD 14 while I work in 15.
Haven't been able to get the exact error in either v14 or v15 the last two days. But, I have things lock. This error, twice, leaves me stuck, and I have to use Task Manager to kill TOAD. Maybe helpful?2020-11-07_19-04-01623577 82.8 KB
The bullpen is bad. The only reliever I am comfortable with is Scott Shultz, and even he gave up two runs in 1.1 innings earlier this week against Sacramento State. The starters are having to go deep into the games and no lead is truly safe once they exit. With the amount of pitches our main guys are throwing, grouped with the inconsistent bullpen, this team will struggle to return to Omaha.
As rough as the bullpen has been, the starting rotation makes up for it. Ben Wetzler could very well set a school record for wins this weekend, and Jace Fry's recent performances have been so impressive that I'm almost disappointed when he doesn't take a no hitter into at least the fifth inning. Andrew Moore has had his struggles but his ERA is still under 3.00.
Sophomore Jeff Hendrix has taken over for Gordon in center field. Although he's not as fast as Gordon, he still possesses above-average speed and has flashed the leather out there on a couple occasions. He leads off the Oregon State batting order due to his knack for making contact at the plate. In Gordon's signature ninth hole spot in the order is freshman Trever Morrison. He is a line-drive hitter that will beat out infield singles on occasion. While this team lost a great senior leader in Tyler Smith, they gained more arm strength and range at shortstop in Morrison.
Not really. He did suffer his first loss of the season two weeks ago in Pullman, where the Cougars capitalized on some placement mistakes by Wetzler. He seems to struggle a bit when his defense makes an error behind him, but I'm nitpicking. His stuff is as good as ever and he is a joy to watch.
e59dfda104