Interface board - pin number error P3
46 views
Skip to first unread message
Lars Petersen
Sep 14, 2013, 11:31:38 PM9/14/13
to quick2wi...@googlegroups.com
Hi there,
I've tested my interface board V0.7 by following instruction in "Testing the interface board":
The table in this document contains an error regarding P3. It says, that P3 is connected to header pin 10. This is not true, P3 is connected to header pin 15 (equal to SOC pin 22 aka GPIO 22). This is confirmed in the circuit diagram.
Lars Petersen, Denmark.
Andrew Scheller
Sep 15, 2013, 6:05:24 AM9/15/13
to quick2wi...@googlegroups.com
> The table in this document contains an error regarding P3. It says, that P3
> is connected to header pin 10. This is not true, P3 is connected to header
> pin 15 (equal to SOC pin 22 aka GPIO 22). This is confirmed in the circuit
> diagram.
I spotted that error too ages ago and reported it to Romilly, and it's
> is connected to header pin 10. This is not true, P3 is connected to header
> pin 15 (equal to SOC pin 22 aka GPIO 22). This is confirmed in the circuit
> diagram.
actually been fixed in the latest version of the testing guide:
http://quick2wire.com/articles/getting-started-with-quick2wire-boards/
Andrew
Reply all
Reply to author
Forward
0 new messages