Qubes 3.2 v--> 4 fail
33 views
Skip to first unread message
Gaijin
Mar 21, 2019, 7:31:05 AM3/21/19
to Qubes Users
I am trying to upgrade from R3.2 to R4. I don't seem to be able to boot
from the ISO I burned to a USB.
I get this message flashed at the bottom of the boot screen before all
turns black:
"Booted on L1TF-vulnerable hardware with SMT/Hyperthreading enabled.
Please access your configuration and choose an explicit "smt-=<bool>'
setting. See XSA-273."
I've tried turning off hyperthreading in the BIOS, but get the same
message. Where can I set this config setting?
from the ISO I burned to a USB.
I get this message flashed at the bottom of the boot screen before all
turns black:
"Booted on L1TF-vulnerable hardware with SMT/Hyperthreading enabled.
Please access your configuration and choose an explicit "smt-=<bool>'
setting. See XSA-273."
I've tried turning off hyperthreading in the BIOS, but get the same
message. Where can I set this config setting?
Gaijin
Mar 22, 2019, 1:42:10 AM3/22/19
to Qubes Users
It had nothing to do with the config file or hyper-threading settings. I
had to switch the BIOS to Legacy mode to get past this.
Reply all
Reply to author
Forward
0 new messages