Install Whonix Templates in R4.0 rc1/2

[nicholas roveda]

Which is the correct procedure to install the Whonix templates from the Templates Community Repo in R4.0 rc1 (current-testing)?

From dom0 I've tried 'sudo qubes-dom0-update enablerepo=qubes-templates-community qubes-template-whonix-{gw,ws}`, but after having downloaded the rpms it complains the key 0x4022e393 is missing and suggests to run `dnf` directly.

So, I've tried to copy '/etc/pki/rpm-gpg/RPM-GPG-KEY-qubes-4.0-templates-community' from dom0 into the UpdateVM, and this time `qubes-dom0-update` logs the new key is imported, but somehow it complains again the key is missing.
I verified and the key mentioned above has the ID 4022E393.

I've also tried to install the packages from an AppVM, to skip signature checking, without risking of compromising others qubes, just in case I've downloaded bad packages.
So, I've run `rpm -i`, but it failed to create the volatile image, reporting '/usr/lib/qubes/prepare-volatile-img.sh' is missing.
After the process is finished in '/val/lib/qubes/vm-templates/whonix-gw (and /whonix-ws) there's only the root image (root.img) and a 'clean-volatile.img.tar' file, but no volatile or private image.

Anyone with the same problems?
What am I missing?

[iry]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

nicholas roveda:

> Which is the correct procedure to install the Whonix templates from
> the Templates Community Repo in R4.0 rc1 (current-testing)?

Hi Nicholas!

Unfortunately, Whonix is not available in Qubes 4.0 rc1 which has been
documented as a known issue in its release note.

A more detailed answer can be found here:
https://forums.whonix.org/t/qubes-4-0-rc1-cant-find-the-whonix-template-
package/4221/2

Best,
iry
-----BEGIN PGP SIGNATURE-----
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=FZLg
-----END PGP SIGNATURE-----

[nicholas roveda]

Thanks for the answer.

The release note specified at that time there was no Whonix template available for R4.0 rc1, but now they are available in the template-community repo and we are at rc2 (almost).